topic Re: Is it possible to run a script on hitting a breakpoint? in CodeWarrior for MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/Is-it-possible-to-run-a-script-on-hitting-a-breakpoint/m-p/306365#M10835 <HTML><HEAD></HEAD><BODY><P>in order to help you, please let us know:</P><P>1. your chip part number</P><P>2. your CW verson</P><P>thanks!</P></BODY></HTML> Sun, 04 May 2014 09:44:29 GMT ZhangJennie 2014-05-04T09:44:29Z Is it possible to run a script on hitting a breakpoint? https://community.nxp.com/t5/CodeWarrior-for-MCU/Is-it-possible-to-run-a-script-on-hitting-a-breakpoint/m-p/306364#M10834 <HTML><HEAD></HEAD><BODY><P>We are debugging a system that drives DC motors with a feedback system.&nbsp; If we put a break point in a task other than the motor driving task it is possible that one of the motor drive outputs was on at the time and the motor will continue to spin while debugging.&nbsp; This causes a fault in our system that prevents further operation.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Is it possible to run a script from CodeWarrior on hitting a breakpoint that could write to the pin state registers and stop the motor?</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Many thanks,</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Tom.</P></BODY></HTML> Tue, 29 Apr 2014 08:55:38 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Is-it-possible-to-run-a-script-on-hitting-a-breakpoint/m-p/306364#M10834 twp 2014-04-29T08:55:38Z Re: Is it possible to run a script on hitting a breakpoint? https://community.nxp.com/t5/CodeWarrior-for-MCU/Is-it-possible-to-run-a-script-on-hitting-a-breakpoint/m-p/306365#M10835 <HTML><HEAD></HEAD><BODY><P>in order to help you, please let us know:</P><P>1. your chip part number</P><P>2. your CW verson</P><P>thanks!</P></BODY></HTML> Sun, 04 May 2014 09:44:29 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Is-it-possible-to-run-a-script-on-hitting-a-breakpoint/m-p/306365#M10835 ZhangJennie 2014-05-04T09:44:29Z Re: Is it possible to run a script on hitting a breakpoint? https://community.nxp.com/t5/CodeWarrior-for-MCU/Is-it-possible-to-run-a-script-on-hitting-a-breakpoint/m-p/306366#M10836 <HTML><HEAD></HEAD><BODY><P>Have a look here, this might give you an idea:</P><P><A href="http://mcuoneclipse.com/2012/07/06/breakpoints-with-special-effects/" title="http://mcuoneclipse.com/2012/07/06/breakpoints-with-special-effects/">Breakpoints with Special Effects | MCU on Eclipse</A></P></BODY></HTML> Sun, 04 May 2014 10:17:53 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Is-it-possible-to-run-a-script-on-hitting-a-breakpoint/m-p/306366#M10836 BlackNight 2014-05-04T10:17:53Z