Writing to Flash failed in CW10.5

kunalgaur — Sun, 16 Mar 2014 19:28:22 GMT

Hello ,

i am using CW10.5, Coldfire MCF54415 with P&E Multilink BDM.

i am using External Flash S70GL02GS from spansion.

when i try to flash Program this external chip i got this log and it keeps on Executing.

Executing download task: C:\Users\kgaur\Documents\MySVN\ECU_Code\DDR2_Bareboard\ECU_Bareboard\ECU.tcl

cmdwin::fl::target -lc ECU_Bareboard_RAM_PnE U-MultiLink

thread break: Stopped, 0x0, 0x0, cpu68K, ECU_Bareboard.elf (state, tid, pid, cpu, target)

cmdwin::fl::target -b 0x40000000 0x4000000

cmdwin::fl::target -v on -l on

cmdwin::fl::device -d S70GL02GS11 -o 256Mx16x1 -a 0x0 0xfffffff

cmdwin::fl::image -f C:\Users\kgaur\Documents\MySVN\ECU_Code\DDR2_Bareboard\ECU_Bareboard\RAM\ECU_Bareboard.elf.S19 -t Auto Detect

-re on -r 0x0 0xfffffff -oe off

cmdwin::fl::erase image

Beginning Operation ...

-------------------------

log: Trying auto-detect...

Auto-detection is successful.

File is of type Motorola S-Record Format.

log: Using Algorithm: amd16x1.elf

log:

log: ======================================================================

log: === Target Configuration Settings

log: === Launch Configuration: ECU_Bareboard_RAM_PnE U-MultiLink

log: ======================================================================

log: Connecting ...

Performing target initialization ...

log: Connected ...

log:

log: ======================================================================

log: === Execute: Erase

log: === Timestamp: Fri Mar 14 09:06:52 2014

log: === Flash Device: S70GL02GS11

log: === Flash Organization: 256Mx16x1

log: === Flash Mem Start Addr: 0x00000000

log: === Flash Mem End Addr: 0x0FFFFFFF

log: ======================================================================

Downloading Flash Device Driver ...

log: Loading Flash Device Driver at: 0x40000000

log: Flash Driver Buffer is at: 0x40001800

log: Flash Driver Buffer Size is: 0x03FFE800

log:

log: Writing the Address

log: Writing the address of the sector list

log: Clearing the status

log: Setting up Registers

log: Commanding target to run

Reading flash ID ...

log: Reading init return status

log: Done

log:

log: Initialization Command Succeeded

log: Writing Erase Function Code

log: Writing the Address

log: Writing the Number of Sectors

log: Writing the address of the sector list

log: Writing the sector list

Erasing Sector 0x00000000 to 0x0001FFFF

log: Clearing the status

log: Setting up Registers

log: Commanding target to run

Erasing ...

log: Reading erase return status

log: Done

Erase Command Succeeded

log: Timestamp: Fri Mar 14 09:06:56 2014

cmdwin::fl::write

Beginning Operation ...

-------------------------

Using restricted address range 0x00000000 to 0x0FFFFFFF

Programming file C:\Users\kgaur\Documents\MySVN\ECU_Code\DDR2_Bareboard\ECU_Bareboard\RAM\ECU_Bareboard.elf.S19

log: Trying auto-detect...

Auto-detection is successful.

File is of type Motorola S-Record Format.

log: Using Algorithm: amd16x1.elf

thread break: Stopped, 0x0, 0x0, cpu68K, ECU_Bareboard.elf (state, tid, pid, cpu, target)

log:

log: ======================================================================

log: === Execute: Program

log: === Timestamp: Fri Mar 14 09:06:56 2014

log: === Flash Device: S70GL02GS11

log: === Flash Organization: 256Mx16x1

log: === Flash Mem Start Addr: 0x00000000

log: === Flash Mem End Addr: 0x0FFFFFFF

log: ======================================================================

Downloading Flash Device Driver ...

log: Loading Flash Device Driver at: 0x40000000

log: Flash Driver Buffer is at: 0x40001800

log: Flash Driver Buffer Size is: 0x03FFE800

log:

log: Writing the Address

log: Writing the address of the sector list

log: Clearing the status

log: Setting up Registers

log: Commanding target to run

Reading flash ID ...

log: Reading init return status

log: Done

log:

log: Initialization Command Succeeded

log: Trying auto-detect...

Auto-detection is successful.

File is of type Motorola S-Record Format.

Downloading 0x00000BF0 bytes to be programmed at 0x00000000

log: Programming 0x00000000 bytes of Target Memory at 0x00000000

log: Writing Program Function Code

log: Writing the Address

log: Writing the Size

log: Writing the address of the buffer

log: Clearing the status

log: Setting up Registers

log: Commanding target to run

Executing program ....

Executing program .....

Executing program ......

Can anyone please help in this problem which i highlighted in the Red color.

All the Operations Such as Erase , blank check are performed with success as seen in the log.

please help, thanks in advance.

Regards,

Kunal Gaur

Re: Writing to Flash failed in CW10.5

trytohelp — Mon, 24 Mar 2014 15:26:59 GMT

Hello Kunal,

there are 2 ways to flash the application:

- via the debugger,

- via the Flash file to Target.

do you have the same problem with 2 flash processes?

http://mcuoneclipse.com/2012/04/30/flashing-with-a-button-and-a-magic-wand/

Regards

Pascal

Re: Writing to Flash failed in CW10.5

trytohelp — Wed, 26 Mar 2014 16:29:59 GMT

Hi Kunal,

in addition.

P&E does not support external flashes.

If you need to flash external flashes you need to use a target task to do it.

Target Task is the "Flash file to Target".

Pascal

CodeWarrior for MCUのトピックRe: Writing to Flash failed in CW10.5

Writing to Flash failed in CW10.5

Re: Writing to Flash failed in CW10.5

Re: Writing to Flash failed in CW10.5