CodeWarrior for MCUのトピックRe: CODEWARRIOR 10.5 issues

CODEWARRIOR 10.5 issues

Braulio_Cespede — Thu, 13 Mar 2014 15:37:11 GMT

Hello Everyone, I was trying to build a Project in Codewarrior 10.5, then suddenly this happen:

As you can see, the build do not go more than 10%.

I dont know what is happening. I think, It could be the Compiler, but I dont know how to chance it.

Thanks for Advanced.

Note:

I had noticed that If I try with another project there's no problem, It's build the project.

Apparently It's just happening in the "My Star Network Demo (End Device)" project for MC13234C (Wireless tranceiver).

Update:

I managed to solve the problem, I will post the solution later.

Re: CODEWARRIOR 10.5 issues

dmarks_ls — Thu, 13 Mar 2014 17:07:52 GMT

It looks like perhaps it's getting stuck on the pre-build step. What appears in the Console window when you try to build? (The tab for the Console is next to Problems.)

Re: CODEWARRIOR 10.5 issues

Braulio_Cespede — Fri, 14 Mar 2014 13:19:54 GMT

Thanks for Answer.

Look:

Re: CODEWARRIOR 10.5 issues

Robinwithu — Fri, 14 Mar 2014 14:55:17 GMT

Hi,

does it's showing anything on Problem window??

Thanks n Regards,

Robin

Re: CODEWARRIOR 10.5 issues

Braulio_Cespede — Fri, 14 Mar 2014 15:18:32 GMT

Nope, Nothing.

Also, the problem is the same for CW 10.4.

I had noticed that If I try with another project there's no problem, It's build the project.

Apparently It's just happening in the "My Star Network Demo (End Device)" project for MC13234 (Wireless tranceiver).