How to see the speed clock (Bus frequency) configuration in debug perspective for eclipse 10.2?

orlandozapata — Tue, 23 Jul 2013 22:53:20 GMT

Hi,

I am using a MCU51QE128, and I want know how to see the clock speed that was configurate in my MCU using codewarrior development studio - eclipse 10.2 in debug perspective, When I worked in codewarrior 6.3 I could see this speed clock in the command window when this was configured step by step . Somebody know How find this window or what should I do to see the speed clock confugured in my proyects using eclipse 10.2? I want to see something like the picture shows.

My Code:

void Config_Reloj(void){

ICSC1=4; //ajusta el reloj interno

ICSC2=0; //frecuencia de bus de 26´748.225hz

ICSSC=0X70;

ICSTRM=0X40;

SOPT1=0X12; //desactiva el reset

}

Thanks for your help and apologize for my english

Re: How to see the speed clock (Bus frequency) configuration in debug perspective for eclipse 10.2?

ZhangJennie — Wed, 24 Jul 2013 02:10:20 GMT

please see bus clock as attached screenshots

CodeWarrior for MCUのトピックRe: How to see the speed clock (Bus frequency) configuration in debug perspective for eclipse 10.2?

How to see the speed clock (Bus frequency) configuration in debug perspective for eclipse 10.2?

Re: How to see the speed clock (Bus frequency) configuration in debug perspective for eclipse 10.2?