topic Can I get a CodeWarrior 5.9 for software development in Software Licensing

Can I get a CodeWarrior 5.9 for software development

johngohman — Fri, 16 Oct 2015 14:29:57 GMT

Is CodeWarrior 5.9 available?

Re: Can I get a CodeWarrior 5.9 for software development

Carlos_Mendoza — Fri, 16 Oct 2015 22:13:54 GMT

Hi John,

Could you tell us which MCU are you planning to use?

You can download CodeWarrior for Microcontrollers - RS08/HC(S)08, ColdFire V1 v6.3 (IDE version 5.9.0) from the following page:

CodeWarrior for Microcontrollers-Classic IDE|Freescale

Hope it helps!

Best Regards,

Carlos Mendoza

Technical Support Engineer

Re: Can I get a CodeWarrior 5.9 for software development

trytohelp — Mon, 19 Oct 2015 07:39:15 GMT

Hi John,

More information ...

CodeWarrior 5.9 is the version of the IDE used but not the tool version.

The IDE V5.9 was used in different tools as HC12 v5.1, DSC V8.3, ColdFire V7.2, MCU V6.3, MPC55xx/56xx V2.10 and other older versions.

The right way to determine the tool version you're using for classic version is

Start the IDE and click on Help | About Freescale CodeWarrior.

Click on Installed Products

Provide us all info displayed.

Or you can save them in a txt file.

If the Installed Products is not available for older version you should find information in the welcome.txt under the installation folder.

Only the last versions can be downloaded under our web site.

For more details I recommend you to have a look to the post:

How to download a Service Pack / Patch / Update?

Older version can be delivered too (condition: have a valid registration).

Have a great day,
Pascal
Freescale Technical Support
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Can I get a CodeWarrior 5.9 for software development

johngohman — Tue, 20 Oct 2015 20:28:38 GMT

Hi,

Your response suggests I need a “valid registration” in order to receive an older version of the development software.

Does that just mean I need to be registered or is this something else such as a license of the product?

In either case I would like to go about acquiring the software. I’ve attached a copy of the version information.

What is the next step?

Thanks

Re: Can I get a CodeWarrior 5.9 for software development

trytohelp — Wed, 21 Oct 2015 06:35:17 GMT

Hi John,

You're using CodeWarrior Development Studio for DSC56800/E Version 8.3.

This is the last version based on Classic IDE.

By default the tool includes the Special Edition license file.

So you can use the tool free of charge according to:

DSC56800/E (Classic IDE, Windows)

Supported Device Families

56800/E Digital Signal Controllers

Features

CodeWarrior IDE
Unlimited assembler
C compiler and C source-level debugger – code and data size restricted to 64KB
Standalone and built-in Flash programmer
Processor Expert with Basic and Advanced Components
Instruction Set Simulator
Free Master

Be aware the CodeWarrior for Microcontrollers v10.6.4 is the last version based on Eclipse released some months ago.

It integrates the development tools for the :

ColdFire®, ColdFire+, DSC, Kinetis, Qorivva, RS08, S08 and S12Z architectures

into a single product based on the Eclipse open development platform.

This version is running on Host platforms

Microsoft® Windows XP 32-bit and 64-bit (Professional Edition)

Microsoft Windows 7 32-bit and 64-bit (Home Premium Edition and Professional Edition)

Microsoft Windows 8 32-bit and 64-bit (Home Premium Edition and Professional Edition)