CodeWarrior Development Tools中的主题 CodeWarrior crashing when opening debug configuration

CodeWarrior crashing when opening debug configuration

GustavoTsea — Thu, 02 May 2024 14:43:03 GMT

Hi,

I'm trying to configure to debug a project, but when i click in edit on the debug configuration, the CodeWarrior 10.7 just crash.

I attached a video showing the problem, do you know what is causing this?

Re: CodeWarrior crashing when opening debug configuration

ZhangJennie — Thu, 02 May 2024 15:56:38 GMT

Hi GustavoTsea

0 The problem may be related with a specific project, test the same with another project.

1 The problem may be related with the workspace. Create a new workspace to test if the problem still exists.

2 The problem may be related with CodeWarrior install. remove the CodeWarrior and reinstall it. test this feature with step 1 then.

3. If the problem still persists after above tests, please use the latest CodeWarrior 11.1.

https://www.nxp.com/design/design-center/software/development-software/codewarrior-development-tools/codewarrior-legacy/codewarrior-for-mcus-eclipse-ide-coldfire-56800-e-dsc-qorivva-56xx-rs08-s08-s12z-11-1:CW-MCU10

Hope this helps

Jun Zhang

Re: CodeWarrior crashing when opening debug configuration

GustavoTsea — Fri, 10 May 2024 17:17:09 GMT

I solved the problem by installing the latest multilink driver direct from the PEmicro website. The CodeWarrior has stopped crashing, probably the old driver that was causing codeWarrior to crash.