CodeWarrior Development Tools中的主题 Create a new S12ZVM project in CW 11.0

Create a new S12ZVM project in CW 11.0

hsg000 — Tue, 02 Jan 2024 09:30:41 GMT

Now the Create a new S12ZVMC128 project in CW 11.0，When choosing the connected emulator again, I only chose P & E USB MultiLink, not Open Source BDM.

But now I have an OSBDM emulator, and since I do not choose Open Source BDM to connect, I can only download the program with the OSBDM emulator, not debug (cannot interrupt points, view variables, etc.)

If I select both connections when building a new project, you can do debug with OSBDM. So I want to ask you how to add a Open Source BDM connection option in an already existing project.

Re: Create a new S12ZVM project in CW 11.0

hsg000 — Tue, 02 Jan 2024 09:36:08 GMT

填充图片

Re: Create a new S12ZVM project in CW 11.0

ZhangJennie — Wed, 03 Jan 2024 09:03:49 GMT

Normally P & E USB MultiLink launch configuration can also connect Open Source BDM interface.

If we need to create a new Open Source BDM manually, please

1. create a new project including Open source BDM launch configuration. Make sure we can connect board with this interface.

2. In your application, we create a new set Debug configurations as below:

3. then create a new launch configuration, configure this launch configuration with referring the Open source BDM launch configuration in step 1

Hope this helps

Jun Zhang