topic Re: The Debugger can not connect to the P&E device in CodeWarrior Development Tools

The Debugger can not connect to the P&E device

Vinod_Chinthoti — Thu, 28 Dec 2023 11:01:10 GMT

Hi,

I am using MC9S08AW16MPUE MCU and I recently installed the CodeWarrior v11.1 on my Windows 10. I also installed the P&E driver for the Multilink Universal.

I created a new project with the MC9S08AW16 controller to test flashing with the PE Multilink universal debugger. but it throne the error of "MESSAGE HC/RS/S12Z GDI Protocol Adapter : Can't connect. The Debugger can not connect to the P&E device"

I am attaching diagnostic information generated by Code Warrior for reference

Re: The Debugger can not connect to the P&E device

Alice_Yang — Wed, 03 Jan 2024 08:03:22 GMT

Hello @Vinod_Chinthoti

What about the version for your P&E multilink, please confirm the debugger and driver inside support MC9S08AW16.

Alice

Re: The Debugger can not connect to the P&E device

Vinod_Chinthoti — Wed, 03 Jan 2024 09:14:08 GMT

Hi Alice_Yang,

Thanks for the response, It was working after updating the patch for CodeWarrior 11.1

#https://www.pemicro.com/forums/forum_topic.cfm?forum_topic_id=8762&forum_id=8#c30037