topic Re: How to setup a third party (programming/debug) driver in Code Warrior in CodeWarrior Development Tools

How to setup a third party (programming/debug) driver in Code Warrior

Manoj2023 — Fri, 06 Oct 2023 07:00:06 GMT

I am planning to use a COTS USB to JTAG Adaptor (FT2232H by www.ftdichip.com) as part of the hardware design. FTDI provides the Windows driver (XDS100 Class USB Serial Port) that can communicate with the adaptor chip. Is there a way to configure the Code Warrior IDE to use this driver for debugging/programming.

Re: How to setup a third party (programming/debug) driver in Code Warrior

ZhangJennie — Sun, 08 Oct 2023 08:10:46 GMT

Thank you for contacting us.

To resolve your issue, pleae kindly provide:

1. your NXP chip part number

2. CodeWarrior cersion

3. your 3rd party programming tool link.

Thanks for your cooperation.

Jun Zhang

Re: How to setup a third party (programming/debug) driver in Code Warrior

Manoj2023 — Tue, 10 Oct 2023 04:15:10 GMT

Hi Jun Zhang,
Thanks for the reply. Please find the details below:
NXP chip : SPC5643LF2MLQ1
Code Warrior Version : 11.1
3rd Party programming tool link :
USB To JTAG chip : FT2232HQ
Driver : https://ftdichip.com/wp-content/uploads/2021/08/CDM212364_Setup.zip
Datasheet : https://ftdichip.com/wp-content/uploads/2020/07/DS_FT2232H.pdf