topic PBL RCW in CodeWarrior Development Tools

PBL RCW

yoshida08 — Tue, 27 Sep 2022 12:46:07 GMT

How can I use CodeWarrior to check if the PBL RCW data from the SD card is loaded?
?

Re: PBL RCW

Pavel_Hernandez — Tue, 27 Sep 2022 16:56:49 GMT

Hello,

Could you tell me what kind of MCU you are using?

Best regards,
Pavel

Re: PBL RCW

yoshida08 — Tue, 27 Sep 2022 23:30:56 GMT

Thank you for your reply.

We are using LS1043A.

We cannot solve the problem that HRESET does not change to High on our design board.

Re: PBL RCW

Chavira — Thu, 29 Sep 2022 17:28:35 GMT

Hello yoshida08!

You can Read/Write the PBL RCW in the Code Warrior.

You have to click on PBL1:PBL at the bottom left on the window "'components"' and then in the part of properties in the right you can configure the PBL RCW.

In the window "'validation"" you can write the new configuration to your device.

And if you prefer import a configuration you can read a device too.

Best regards!

Re: PBL RCW

yoshida08 — Fri, 07 Oct 2022 13:00:05 GMT

Thank you for your reply.

I'm sorry, I reply late.

I will confirm contents of your reply.

Re: PBL RCW

yoshida08 — Fri, 07 Oct 2022 13:05:30 GMT

We could solve the problem that HRESET does not change to High on our design board.

IFC_AVD signal was problem, signal was Low level.