topic Re: Make Library file in CodeWarrior IDE in CodeWarrior Development Tools

Make Library file in CodeWarrior IDE

kmh48301 — Wed, 06 Jul 2022 07:59:33 GMT

Hello.

I'm new to use CodeWarrior IDE.

The version is 5.9.0.

I need to create Library File in this IDE

(or with this compiler in this IDE)

I couldn't find how to create library file.

I also did googling..

Re: Make Library file in CodeWarrior IDE

ZhangJennie — Thu, 07 Jul 2022 06:39:51 GMT

Hi @kmh48301

what's your chip part number?

The first link in your post is for 8/16bit MCU.

ALT+F7 is to open standard settings. you can also get it by clicking on this icon

Thanks,

Jun Zhang

Re: Make Library file in CodeWarrior IDE

kmh48301 — Fri, 08 Jul 2022 00:29:32 GMT

Hi. @ZhangJennie

My chip part number is "SPC5605BK0CLQ6"

When I created project in CodeWarrior IDE, I selected MPC5605

AND no TM, no Floating Point.

I need to create library file for customer.

Thanks

Best Regards

Phillip

Re: Make Library file in CodeWarrior IDE

stanish — Mon, 25 Sep 2023 11:39:12 GMT

Hi,

This issue is probably resolved. Anyway, just in case someone else is facing this issue...

In CodeWarrior Classic (CW for MPC55xx/56xx v2.x) there is no option to generate a library project in a New project wizard.

I'd suggest creating a new application project for selected derivative and then go to project properties (Alt+F7) and change the EPPC Target settings - Project type to "Library" and adjust the output file name e.g. to "my_library_name.a":

With this change go back to the project and remove all unnecessary files (linker command file, startup, files etc...) and let just the source files with library functions. When you successfully build the project there is an .a file in your output directory.

Hope it helps.

Stan