Error message: Core not responding

rb60 — Sat, 19 Jun 2021 17:36:24 GMT

I am attempting to program the boot flash on a MPC8543 PowerPC based switch that was corrupted during a firmware upgrade...

I am unable to execute the target task to program the flash because the execute task button is not enabled (it is grayed out).

By turning on logging I see that the probe is passing self test and is able to scan the JTAG bus and see the processor, however it is reporting the following error:

coreh = [serverh:0;cc_index:0;chain_pos:0]

mode = 4

ccs_core_run_mode; ccs_error = 5

Error message: Core not responding

Any help would be appreciated. In searching for answers I see that others have encountered this message, however even though some have marked the issue as solved, they have not posted the solution...

Re: Error message: Core not responding

yipingwang — Tue, 22 Jun 2021 10:28:58 GMT

Would you please attach the whole CCS log?

Do you use CodeWarrior for PA 10.5.1?

CodeWarrior Development ToolsのトピックRe: Error message: Core not responding

Error message: Core not responding

Re: Error message: Core not responding