topic CodeWarrior TAP tunnel across network in CodeWarrior Development Tools

CodeWarrior TAP tunnel across network

smiller2 — Fri, 11 Jun 2021 02:45:48 GMT

Does CodeWarrior support tunneling across external networks to reach the TAP ? What I want to do is setup my HW with the CodeWarrior TAP connected to my local network and then have it tunnel to the Internet so it can be debugged remotely. Segger and others provide this with a server application that runs on a local PC.

Thanks.

Re: CodeWarrior TAP tunnel across network

gusarambula — Fri, 11 Jun 2021 14:29:34 GMT

Hello Smiller2,

Would you please let us know which NXP device you are using with Code Warrior?

Regards,
Gustavo

Re: CodeWarrior TAP tunnel across network

smiller2 — Fri, 11 Jun 2021 14:35:22 GMT

The part is the LS1046A. The issue is DDR validation does not work correctly on this board. However, the DIMM appears to work. Given that I am not a CodeWarrior GURU, my hope was to allow someone external, like an FAE, take control system and run DDR validation remotely to verify what I am seeing.

Re: CodeWarrior TAP tunnel across network

yipingwang — Thu, 17 Jun 2021 09:31:18 GMT

CodeWarrior supports tunneling across external networks to reach the TAP.