CodeWarrior Development ToolsのトピックRe: CodeWarrior V11.1 USB TAP lost communication issue

CodeWarrior V11.1 USB TAP lost communication issue

mgwalker95 — Thu, 08 Oct 2020 05:45:01 GMT

Hi,

I am connecting to the WCT-15W1CFFPD dev board using a USB TAP. When I program the WCT1013 after clicking the start button CodeWarrior says that "The debugger has lost communication on connection "wct1013PDdemo_FLASH_LDM_FSL USB TAP""

When I try to reestablish connection it cannot.

Is there a way to fix this issue so that I can debug the wct1013 in real time?

Re: CodeWarrior V11.1 USB TAP lost communication issue

xiangjun_rong — Mon, 12 Oct 2020 03:38:57 GMT

Hi, Michael,

I have tried my MC56F84789 board, I can communicate with TWR-568400 board.

I suggest you try the following process so that we can confirm that the USBTAP device is okay.

1)after you connect the target board, sure that the USBTAP can be identified.

2)after you download the code, check the ccs tools:

3)If your USBTAP device has issue, pls consider the Multilink Universal device from the link, which supports the MWCT10xx family:

http://www.pemicro.com/

Hope it can help you

XiangJun Rong

Re: CodeWarrior V11.1 USB TAP lost communication issue

xiangjun_rong — Mon, 12 Oct 2020 03:41:08 GMT

Hi, Michael,

Pls confirm if you use "wct1013PDdemo_FLASH_LDM_FSL USB TAP" or "wct1013PDdemo_FLASH_SDM_FSL USB TAP"

XiangJun Rong

Re: CodeWarrior V11.1 USB TAP lost communication issue

mgwalker95 — Fri, 16 Oct 2020 05:13:23 GMT

Hi,

I am using "wct1013PDdemo_FLASH_LDM_FSL USB TAP" is this the correct configuration?