CodeWarrior Development ToolsのトピックRe: problem with programming S08SH8

problem with programming S08SH8

juliancox — Wed, 23 Sep 2020 16:57:30 GMT

Using CW11 and Multilink Universal I can debug my S08SH8 successfully, but when I try to flash program it i get the error

Also when using the cyclone i get the Error Code $00000007 Error: Cannot enter debug mode.

I am not , and never have, used a MC9S08QE16

vicentegomez — Thu, 24 Sep 2020 15:14:13 GMT

From your picture

Are you are trying to program the SH or the QE device?

Please check that you only have one project open in code warrior also please check that the connection is for the SH device

I hope this will help you

Regards

Vicente

juliancox — Tue, 10 Nov 2020 11:21:20 GMT

I know this is a very old post, but I am just tidying up. However:

1. When I say that I am not, and have never used a QE16 - that is a clue to the fact that I am NOT trying to program a QE16

2. I have only one open project, but since none of my (closed) projects use a QE16, whether I have all or only one project open should not matter.