How to use P2020's interrupts in CodeWarriorV10.5?

1475849560 — Wed, 22 Jul 2020 06:12:35 GMT

Thanks!

Re: How to use P2020's interrupts in CodeWarriorV10.5?

Pavel — Thu, 23 Jul 2020 11:56:29 GMT

See attached file. This file contains CodeWarrior 10.5.1 test project for the P2020. This project was crated using CodeWarrior wizard.

Read the P2020DS_README.txt file in this project. Redirect output to a debugger console instead of UART driver.

This project uses syscall interrupt.

Change the InterruptHandler(long cause) function in the interrupt.c file.

Add similar code in this function:

if (cause == 0x500)

{

My_interrupt_handler();

}

Add the My_interrupt_handler() function in your code for interrupts from DUART.

Have a great day,
Pavel Chubakov

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: How to use P2020's interrupts in CodeWarriorV10.5?

1475849560 — Fri, 24 Jul 2020 01:21:17 GMT

Thank you very much!

CodeWarrior Development ToolsのトピックHow to use P2020's interrupts in CodeWarriorV10.5?

How to use P2020's interrupts in CodeWarriorV10.5?

Re: How to use P2020's interrupts in CodeWarriorV10.5?

Re: How to use P2020's interrupts in CodeWarriorV10.5?