topic Re: Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx in CodeWarrior Development Tools

Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx

mayursavaj — Tue, 31 Dec 2019 06:46:38 GMT

Hi All,

I have bought New Pe Micro USB-ML-UNIVERSAL Rev. D. I am getting error while programming/ debugging.

The Pe Micro USB-ML-UNIVERSAL Rev. B is working fine with same setup.

IDE: 10.xx/11.xx

MCU: MK22FX512

Can any one help me to figure out issue?

Thanks in advance.

Mayur Savaj

Re: Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx

Alexis_A — Fri, 03 Jan 2020 17:18:03 GMT

Hello Mayur,

That's a strange behavior, could you try reinstalling the driver for the USB-ML-UNIVERSAL? Here's the link. The name is USB Multilink Universal (and FX) Resource CD.

Best Regards,

Alexis Andalon

Re: Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx

mayursavaj — Mon, 06 Jan 2020 06:51:58 GMT

I have tried to above step but still same issue exist.

is there any settings to be done?

Re: Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx

steven_mcgrath — Mon, 06 Jan 2020 16:15:55 GMT

Hello Mayur,

I would suggest you follow FAQ 211 on the PEmicro website related to this issue. Eventually, the FAQ will prompt you download a patch for the CodeWarrior software located below the FAQ. The download specific to your issue is entitled “Patch for Eclipse CW10.x” and will require a PEmicro account in order to download successfully.

Once the patch is downloaded, there should be a ReadMe.txt file with instructions to follow in order to get your software working with newer PEmicro tools.

Let me know if you have any issues with this.

Steve

Re: Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx

mayursavaj — Tue, 07 Jan 2020 05:37:40 GMT

Hi Steve,

I have tried as per ReadMe.txt file. But still issue exist.

Thanks,

Mayur Savaj

Re: Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx

Alexis_A — Tue, 07 Jan 2020 17:59:35 GMT

Hello Mayur,

I will suggest to contact PEMicro for more support.

Best Regards,
Alexis Andalon

Re: Pe Micro USB-ML-UNIVERSAL Rev. D issue with CW 10.xx/11.xx

steven_mcgrath — Tue, 07 Jan 2020 19:54:33 GMT

Hello Mayur,

I tried replicating your error with a USB Multilink Universal Rev. D and the newest version of CodeWarrior 11.1 but had no issues. I would suggest you use the newest version of CodeWarrior as well just to double check.

If issues persist, then as Alexis stated above please contact PEmicro for further assistance.

Steve