Write data in the Flash

vitorgabriel100 — Fri, 01 Nov 2019 18:13:01 GMT

Hello,

I'm utilizing MKW24d board. I would like to know how I could do to write a data block in the flash memory? I also would like to know if there is a example that does it?

Thanks

Re: Write data in the Flash

diego_charles — Mon, 04 Nov 2019 23:18:12 GMT

Hello, Vitor

I have to mention that your device is not recommended for new designs by NXP. However, we can provide you flash memory examples, depending on your IDE.

If your IDE is MCUXpresso download the SDK examples for your device https://mcuxpresso.nxp.com/en/welcome then select the Development board. Download the SDK archive. Import an SDK example for flash. If you are unaware of how to import the example then check this video https://www.nxp.com/design/training/importing-and-using-mcuxpresso-sdk-examples:TIP-PART-4-IMPORTING-AN-SDK-EXAMPLE-PROJECT

If you are using IAR of KDS IDE's go to https://www.nxp.com/downloads/en/protocol-stacks/MKW2xD-MCR20A-Connectivity-Software.exe and download the MKW24 connectivity software.

Have a great day,
Diego

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Re: Write data in the Flash in CodeWarrior Development Tools

Write data in the Flash

Re: Write data in the Flash