topic Re: change MCU in CodeWarrior Development Tools https://community.nxp.com/t5/CodeWarrior-Development-Tools/change-MCU/m-p/308152#M780 <HTML><HEAD></HEAD><BODY><P>Hello Bruce:</P><P></P><P>In CW v10.x (Eclipse), there is not a direct method to change the target CPU of a project.</P><P></P><P>The recommended procedure is always to create a new project for the desired device and copy the source and header files from the original project.</P><P></P><P>If using Processor Expert, then there is an alternative to do this; check the next tutorial by colleague Erich Styger:</P><P></P><P><A href="http://mcuoneclipse.com/2012/08/16/changing-the-cpu-with-processor-expert/" title="http://mcuoneclipse.com/2012/08/16/changing-the-cpu-with-processor-expert/">Changing the CPU with Processor Expert | MCU on Eclipse</A></P><P><BR />Regards!,<BR />Jorge Gonzalez</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Sun, 04 May 2014 23:41:28 GMT Jorge_Gonzalez 2014-05-04T23:41:28Z change MCU https://community.nxp.com/t5/CodeWarrior-Development-Tools/change-MCU/m-p/308150#M778 <HTML><HEAD></HEAD><BODY><P><BR />In CW6 there was a button to change MCU.&nbsp; How do I change MCU in CW10?</P></BODY></HTML> Thu, 01 May 2014 14:30:47 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/change-MCU/m-p/308150#M778 wba 2014-05-01T14:30:47Z Re: change MCU https://community.nxp.com/t5/CodeWarrior-Development-Tools/change-MCU/m-p/308151#M779 <HTML><HEAD></HEAD><BODY><P>Could you please attach a screenshot to show this button? Thanks!</P></BODY></HTML> Sun, 04 May 2014 02:43:11 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/change-MCU/m-p/308151#M779 TICS_Fiona 2014-05-04T02:43:11Z Re: change MCU https://community.nxp.com/t5/CodeWarrior-Development-Tools/change-MCU/m-p/308152#M780 <HTML><HEAD></HEAD><BODY><P>Hello Bruce:</P><P></P><P>In CW v10.x (Eclipse), there is not a direct method to change the target CPU of a project.</P><P></P><P>The recommended procedure is always to create a new project for the desired device and copy the source and header files from the original project.</P><P></P><P>If using Processor Expert, then there is an alternative to do this; check the next tutorial by colleague Erich Styger:</P><P></P><P><A href="http://mcuoneclipse.com/2012/08/16/changing-the-cpu-with-processor-expert/" title="http://mcuoneclipse.com/2012/08/16/changing-the-cpu-with-processor-expert/">Changing the CPU with Processor Expert | MCU on Eclipse</A></P><P><BR />Regards!,<BR />Jorge Gonzalez</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Sun, 04 May 2014 23:41:28 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/change-MCU/m-p/308152#M780 Jorge_Gonzalez 2014-05-04T23:41:28Z