topic Re: Multilink Universal cannot connect to MCF5566EVB in CodeWarrior Development Tools

Multilink Universal cannot connect to MCF5566EVB

zwilcox — Mon, 06 May 2019 18:56:42 GMT

I just got an MCF5566EVB eval board. I'm trying connect with the P&E Multilink Universal that came with it.

I'm using CodeWarrior Development Studio for Freescale MPC55xx and MPC56xx version 2.10, build 120305.

When I try to connect, I get the following message in the Status Window:

Debugger retrying force to background mode. Can not enter background Mode.

In the PEMicro Connection manager, I get a message saying "Can't communicate with the target processor! Please check your connections between the cable and the target and make sure the target has power."

One thing I've notice, is the PEMICRO Connection Manager is referring to BDM but the MPC5566EVB uses JTAG.

Re: Multilink Universal cannot connect to MCF5566EVB

martin_kovar — Tue, 07 May 2019 08:50:39 GMT

Hello,

could you please show me, which version of ICDPPCNEXUS you use in CW 2.10?

I tried with two versions (version 1.34 did not work), but with version 6.83 it works correct.

Please let me know.

Regards,

Martin

Re: Multilink Universal cannot connect to MCF5566EVB

zwilcox — Tue, 07 May 2019 15:23:27 GMT

It appears I have Version 1.34

How do I update ICDPPCNEXUS? I've tried using the CodeWarrior Updater and it says I'm up-to-date

Re: Multilink Universal cannot connect to MCF5566EVB

martin_kovar — Thu, 09 May 2019 10:52:33 GMT

Hello,

you can download ICDPPCNEXUS from the link below and check, if it works.

ICDPPCNEXUS | In-Circuit Debugger for NXP MPC55xx/56xx/57xx & STMicroelectronics SPC5 | PEmicro

Another possibility is contact PeMicro support directly and ask them, if they can provide you the newest version for CW2.10.

Regards,

Martin

Re: Multilink Universal cannot connect to MCF5566EVB

martin_kovar — Fri, 10 May 2019 06:52:12 GMT

Hello,

I can see some download link at Product Details tab. Please see the figure below.

But from my point of view, it would be good, if you contact PeMicro support, describe your problem and ask them, what could be the best solution.

Regards,

Martin

Re: Multilink Universal cannot connect to MCF5566EVB

smallyang — Sat, 23 Mar 2024 02:58:49 GMT

请问你找到安装包了吗，可以发个给我吗这里的链接都失效了

Re: Multilink Universal cannot connect to MCF5566EVB

smallyang — Sat, 23 Mar 2024 09:12:13 GMT

你好，请问我的pemicro调试器输入install code 没有生成蓝色的registration code 是怎么回事呢

这是别人的界面

这是我的界面