CodeWarrior Development ToolsのトピックRe: The Debugger can not connect to the P&E device.

The Debugger can not connect to the P&E device.

adrien_segura12 — Fri, 03 May 2019 13:18:16 GMT

Hi !

I'm new on Codewarrior and i use a Universal Multilink (Farnell 2315740) to load my projects.

after a trip to make my project work on an other computer with the multilink, i tried to load my

project on my work computer. And then codewarrior send me this error :

Launching has encountered a problem.

ARM GDI Protocol Adapter : Can't connect. The Debugger can not connect to the P&E device.

I saw that i got the same problem if i diconnect the multilink. but, it seems to work, both leds (orange and blue)

are on, and i re-installed my drivers and codewarrior .

I noticed that this error occured not only on codewarrior.

Anyone has an idea of how to solve this problem?

Thanks for reading me !

Re: The Debugger can not connect to the P&E device.

ZhangJennie — Mon, 06 May 2019 04:12:57 GMT

Hi Adrien Segura ,

Please send us more information about your query:

1. Do you use demo board or customized board? part number?

2. Your CW version?

Have a nice day,

Jun Zhang

Re: The Debugger can not connect to the P&E device.

adrien_segura12 — Mon, 06 May 2019 07:10:40 GMT

Hi,

thanks for your reply ! I use CodeWarrior V 10.6.4,

my card is customized and used for a bus communication application.

I re-tried to use the multilink on other computer and other applications, it seems that i always have the same error message :

ARM GDI Protocol Adapter : Can't connect. The Debugger can not connect to the P&E device.

Any ideas? thanks for your answers !

Re: The Debugger can not connect to the P&E device.

ZhangJennie — Mon, 06 May 2019 07:33:10 GMT

Hi Adrien,

I suggest you refer this check list to shoot trouble:

Debugging Failure: Check List and Hints | MCU on Eclipse

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: The Debugger can not connect to the P&E device.

adrien_segura12 — Mon, 13 May 2019 14:19:15 GMT

Thanks ! the problem is resolved !

To all people who have the same problem, the link upside is perfect !

Thank you again ZhangJennie, it was a hardware problem, but the steps of the link you gave were really helpful.

Re: The Debugger can not connect to the P&E device.

ZhangJennie — Tue, 14 May 2019 01:50:22 GMT

You are welcome!