CodeWarrior Development ToolsのトピックRe: CodeWarrior10.6.4:How to generate Binary File?

CodeWarrior10.6.4:How to generate Binary File?

maoyuanluo — Mon, 14 Jan 2019 06:44:14 GMT

Dear:

when I want to generate Binary File, The error message is as follows：

How can I fix this error?

Re: CodeWarrior10.6.4:How to generate Binary File?

ZhangJennie — Tue, 15 Jan 2019 01:32:36 GMT

Hi Luo,

What's your chip part number?

Jennie Zhang

Re: CodeWarrior10.6.4:How to generate Binary File?

maoyuanluo — Thu, 17 Jan 2019 02:15:34 GMT

Hi Zhang,

Chip type is MPC5606B

Thank you！

Re: CodeWarrior10.6.4:How to generate Binary File?

danielchen — Thu, 17 Jan 2019 07:13:02 GMT

Hi Maoyuan:

I would suggest you check your linker file. especially .bss and .exec_vect_vle. check the address is valid ?

From your log, it seems the gap wasn't updated correctly (too much).

Regards

Daniel

Re: CodeWarrior10.6.4:How to generate Binary File?

maoyuanluo — Thu, 17 Jan 2019 07:46:30 GMT

use same lcf file, i can generate mot file, but i can't generate bin file.

I don't know the difference where it is.

Re: CodeWarrior10.6.4:How to generate Binary File?

danielchen — Tue, 22 Jan 2019 07:06:48 GMT

Hi Maoyuan:

There is a Motorola S-Record to Binary File Converter,

Motorola S-Record to BINARY File Converter

A bin file is a binary image, it contains the image byte by byte that can be flashed to any address.

Motorola S-record is a file format, that conveys binary information in ASCII hex text form.

Regards

Daniel

Re: CodeWarrior10.6.4:How to generate Binary File?

maoyuanluo — Thu, 24 Jan 2019 09:51:34 GMT

It's very powerful tools！Thanks a lot！

Re: CodeWarrior10.6.4:How to generate Binary File?

danielchen — Thu, 24 Jan 2019 13:07:36 GMT

welcome, happy to know that it works.

Regards

Daniel

Re: CodeWarrior10.6.4:How to generate Binary File?

stanish — Wed, 30 Jan 2019 16:34:17 GMT

Hi,

The gap is typically caused by having some data from the binary file located in RAM (0x4000_0000) whereas the rest of the application is placed into FLASH (0x0000_0000).

I'd guess in your case ".exec_vect_vle" section is loacted in RAM right? is it some code running from RAM?

There was very similar question related to GCC compiler:

https://community.nxp.com/message/1102293?commentID=1102293#comment-1102293

Hope it helps.

Stan

Re: CodeWarrior10.6.4:How to generate Binary File?

maoyuanluo — Mon, 18 Feb 2019 01:54:23 GMT

Hi:

when i use the NOLOAD keyword in *.lcf file in CodeWarrior 10.6.4 IDE, it show me the error:

and I found the IDE have no NOLOAD keyword in help contents:

I don't know how to solves it, please help me to fix it. Thank you!