CodeWarrior Development ToolsのトピックRe: CodeWarrior S12Z linker not acknowledged

CodeWarrior S12Z linker not acknowledged

pierluigi_milos — Fri, 01 Mar 2019 13:25:55 GMT

Hi,

During the building, CodeWarrior (10.6) stops due to the following error:

'Invoking: S12Z Linker'
"C:/Freescale/CW MCU v10.6/MCU/S12lisa_Tools/Build_Tools/linker" -ArgFile"application.args" -O"application.elf"
""C:/Freescale/CW MCU v10.6/MCU/S12lisa_Tools/Build_Tools/linker"" non Š riconosciuto come comando interno o esterno, un programma eseguibile o un file batch.
mingw32-make: *** [LMU_L7E_CU.elf] Error 1

I supposed that the .dll of linker was corrupted but I tried to replaced it, getting it from another PC where CodeWarrior 10.6 is installed, and I did not resolve.

I can't find any solution to this problem. Can someone help me?

Thanks

Regard!

Re: CodeWarrior S12Z linker not acknowledged

Alice_Yang — Mon, 04 Mar 2019 08:15:54 GMT

Hello Pierluigi Milosa ,

This error occur just on your specified project, or all projects ? How about a simple project ?

You mentioned you test on other PC, how about it ? If it can work well, please reinstall CW on your PC.

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: CodeWarrior S12Z linker not acknowledged

pierluigi_milos — Mon, 04 Mar 2019 08:29:51 GMT

Hi Alice_Yang,

this error occurs on all the projects. After this error have been occurred on one project, it has started to appear on all the projects, even those worked before.

The same projects on another PC work well.

Do you think I need to reinstall CW?

Thanks

Re: CodeWarrior S12Z linker not acknowledged

Alice_Yang — Tue, 05 Mar 2019 06:37:51 GMT

Hi Pierluigi,

Try to uninstall it, then reinstall.

Re: CodeWarrior S12Z linker not acknowledged

pierluigi_milos — Tue, 05 Mar 2019 08:20:29 GMT

Hi Alice_Yang,

uninstalling and reinstalling CW, the problem was solved.

Thanks for your help

Have a great day