topic Re: How do I program the MC9S12XET?What hardware to do I need to program and what software should I use to program? in CodeWarrior Development Tools

How do I program the MC9S12XET?What hardware to do I need to program and what software should I use to program?

irrasyonel22 — Thu, 28 Feb 2019 22:39:27 GMT

i have a MC9S12XET256MAL16.i don't found the program.

Re: How do I program the MC9S12XET?What hardware to do I need to program and what software should I use to program?

ZhangJennie — Fri, 01 Mar 2019 06:18:28 GMT

MC9S12XET256 is supported by classic CW5.2.

https://www.nxp.com/support/developer-resources/software-development-tools/codewarrior-development-tools/codewarrior-leg…

debug tool:

I recommend you use MULTILINK UNIVERSAL

MULTILINK | Debug Probe | PEmicro

Have a great day,
Jun Zhang

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: How do I program the MC9S12XET?What hardware to do I need to program and what software should I use to program?

irrasyonel22 — Fri, 01 Mar 2019 21:53:33 GMT

Hi Jun Zhang,

Thank you for the information you provide.

Have a great day,

Yusuf Yıldız

Re: How do I program the MC9S12XET?What hardware to do I need to program and what software should I use to program?

ZhangJennie — Sat, 02 Mar 2019 08:18:13 GMT

Hi Yusuf Yildiz

You are welcome!

If this post answers your question, please click the "Mark Correct" button. Thank you!

Have a nice day,

Jun Zhang