topic Re: The SRecCvt error : S-record data not in specified memory map in CodeWarrior Development Tools

The SRecCvt error : S-record data not in specified memory map

rotato — Mon, 06 Aug 2018 04:23:49 GMT

Hi,

I fail to use SRecCvt for formating a S12G128 project.abs.s19 ,the error is

"S-record data not in specified memory map"

The application program prm file and project.abs.s19 file are attached.Where is the problem?

Re: The SRecCvt error : S-record data not in specified memory map

kef2 — Mon, 06 Aug 2018 20:02:22 GMT

Hi,

you don't have to use SRecCvt with CW. CW by defaualt creates two S-records files, *.s19 and *.phy. .phy file should be formatted the same like SRecCvt would do. For S12X derivatives file extension is *.glo instead of *.phy. When not sure look into project *.bbl file. Look for Burner utility documentation for what commands in *.bbl do.

Edward

Re: The SRecCvt error : S-record data not in specified memory map

ZhangJennie — Wed, 08 Aug 2018 07:43:43 GMT

HI YuWu,

This error message means that the tool detects the memory address in your input s19 file doesn't match the product memory map definition.

I checked your s19 file, seems there is one line of code abnormal. See below I highlighted:

Here, "C167" is defined at address at 0x8000. However, 0x8000 TO 0xBFFF is used in banked as you defined in prm file.

For test, if you delete this line 6: S1058000C16752
Save file.

SRecCvt should be able to convert s19 file successfully.

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------