about CW11''s optimsize difference for O1 and O3

teddywang — Tue, 11 Dec 2018 05:00:35 GMT

hi all

My client uses S9KEAZN64 with CW11,found that a operation for internal EEPROM,CW11 has 2 optimsize leve,one is O1 ,another is O3,my client found the function has some error,when use optimize -O3. my client wants to know the difference O1 and O3

Re: about CW11''s optimsize difference for O1 and O3

jorge_a_vazquez — Thu, 13 Dec 2018 23:16:30 GMT

Hi Teddy Wang

Please check the following links:

https://www.nxp.com/docs/en/reference-manual/CWMCUGCCCMPREF.pdf#page=12

https://www.nxp.com/docs/en/application-note/AN4808.pdf

You can also find the MCU_Kinetis_GCC.pdf document under:

CW MCU v11.0_path\MCU\Help\PDF

Here you can find the difference between those optimization levels.

Hope this information could help you, please don't hesitate to contact me if you have any other question.

Best regards

Jorge Alcala

topic about CW11''s optimsize difference for O1 and O3 in CodeWarrior Development Tools

about CW11''s optimsize difference for O1 and O3

Re: about CW11''s optimsize difference for O1 and O3