topic Re: Can't find a source file in CodeWarrior Development Tools

Can't find a source file

frankkong — Tue, 14 Aug 2018 06:41:16 GMT

Hello,

When I import a new project and debug, it comes as the picture below:

I can't find the source in my computer. What is the function of it? What can I do to replace the path? Where can I find MC912SZVM_AMMCLIB_FREE\src\GDFLIB_FilterMA.c?

Thanks!

Re: Can't find a source file

ZhangJennie — Tue, 14 Aug 2018 09:57:08 GMT

Hi Frank,

Is this a NXP demo project? If yes, please send a link, Thus we can check it further.

Thanks.

Best Regards,

Jennie

Re: Can't find a source file

frankkong — Wed, 15 Aug 2018 03:37:00 GMT

Hi Jennie,

I use the demo AN5135. I have change it to S12ZVML31. You can download it at Search Results: AN5135 ,the first result.

You can find the find the source path in Debug Configurations-->Source. I can,t find the path"C:\ccwork\RE004C.......". I can't find MC912SZVM_AMMCLIB_FREE ,also.

I think if I can find MC912SZVM_AMMCLIB_FREE library and change the path ,the question will solve.

Thanks!

Re: Can't find a source file

ZhangJennie — Fri, 17 Aug 2018 05:41:00 GMT

Hi Frank Kong

I tested this project from my site, but I didn't find any error.

I use CW10.7. My test video is attached.

Can you please try same on your side?

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Can't find a source file

frankkong — Mon, 20 Aug 2018 02:08:51 GMT

Hi,ZhangJennie

I use CW11.0. It work as well if I ignore the hint. As the picture below , I delete the source path. It doesn't cause any mistake. I just want to know the meaning of the Source Lookup Path?

Thanks!

Re: Can't find a source file

frankkong — Mon, 20 Aug 2018 02:58:59 GMT

Hi, ZhangJennie,

If I press suspend or add breakpoint while running ,It will display the error.The source path is the same.

Re: Can't find a source file

ZhangJennie — Wed, 22 Aug 2018 07:42:33 GMT

Hi Frank,

I just import the project to CW11, I also got correct result.

Please try go to IDE menu "Project", "clean". then rebuild again.

If problem still same. Can you reinstall AN5135SW to default path? Can you please test it on another computer?

Have a great day,
Jennie Zhang

Re: Can't find a source file

frankkong — Wed, 22 Aug 2018 09:43:48 GMT

Hi,ZhangJennie

I have change my computer. Can you see the Source Lookup Path--Path Mapping:Found Mappings? As show in the picture. Can you find "C:\ccwork\RE004C_view_release_view\MC\MC352....." in the project or your computer? I will test it on another computer.

Thanks.

Re: Can't find a source file

frankkong — Wed, 22 Aug 2018 10:19:01 GMT

Hi,ZhangJennie,

You can add a breakpiont at StateRun() while running under debug.Then you can see the problem.

Thanks!

Re: Can't find a source file

frankkong — Thu, 23 Aug 2018 01:55:08 GMT

Hi，ZhangJennie

Can you test my project on you computer?

Re: Can't find a source file

ZhangJennie — Thu, 23 Aug 2018 03:29:41 GMT

Hi Frank,

I found below path was added in Source tab, which we don't need, please remove it. Please see my testing video attached.

Have a great day,
Jennie Zhang

Re: Can't find a source file

frankkong — Thu, 23 Aug 2018 09:46:20 GMT

Hi ,Zhang Jennie

I have remove the Source tab in my project. It doesn't work.

Now ,I have another problem.

I use the interrupt of Timer0 IOC0 and IOC3. IOC3 is for input capture and IOC0 for output compare. The timer base frequency is 200K. The problem is when I set the different priority it will meet some problem. If I set the same priority it works well. You can see the problem below:

Re: Can't find a source file

ZhangJennie — Mon, 27 Aug 2018 03:14:21 GMT

Hi Frank,

Sorry, but can we focus this thread to the original question to separate different subject? For new question, I would suggest you create a new thread.

Last time I send you the video of the fix, can't it work for you? I use CW v11? which version do you work with?

Please let me know how I can reproduce your issue?

Best Regards,

Jennie Zhang

Re: Can't find a source file

frankkong — Tue, 28 Aug 2018 01:35:32 GMT

Hi, ZhangJennie,

It doesn't work. I use CW v11 too.

You can add a breakpiont at StateRun() while running under debug.Then you can see the problem.

Now I disable the Trace and Profile,it will not cause the problem in most cases.

Thanks!

Re: Can't find a source file

ZhangJennie — Wed, 29 Aug 2018 07:14:45 GMT

Hi Frank,

I tested your project again, but still can't reproduce problem.

Your project runs well from my side.

See attached video and my testing project.

Please test it in a new created workspace, I also suggest you test it on another computer to isolate system issue.

Have a great day,
Jennie Zhang

Re: Can't find a source file

frankkong — Thu, 30 Aug 2018 02:03:58 GMT

Hi, ZhangJennie,

Thanks for your attention. I have test it on another computer. Now I disable the "Trace and Profile" at the "Debug Configurations" and delete the invalid source path. The problem has been solved.

Thank you very much.

Re: Can't find a source file

ZhangJennie — Thu, 30 Aug 2018 02:37:58 GMT

Hi Frank.

Good to know your problem has been solved.

You are welcome.

Have a great day,
Jennie Zhang