CodeWarrior Development ToolsのトピックRe: "Fail to resume target process.Downloading binary to target..."

"Fail to resume target process.Downloading binary to target..."

xiaofangu — Wed, 20 Dec 2017 09:06:00 GMT

Hi,

When I use PE to debug a project based on MC9s12ZVML128 ,then the CW10.6 reported the problem:

and the detail information is:

I just add a LIN module into a project,and the LIN module is "FSL_LIN_2.x_STACK",but when i didnt do this,the project work well and can debug. but when i add the LIN module into the project, the problem occured.

So,what should i do?

Any help will be appreciated!

Re: "Fail to resume target process.Downloading binary to target..."

xiaofangu — Thu, 21 Dec 2017 02:39:37 GMT

I think I need to provide more information:

The original project is "MC9S12ZVML128_PMSM_Sensorless",the project can download to my designed board through PE.But when I add the LIN module ,the problem occurs.

Can anybody help me?

Re: "Fail to resume target process.Downloading binary to target..."

Alice_Yang — Thu, 21 Dec 2017 03:41:58 GMT

Hello Xiaofan,

How about delete the .metadata folder under workspace to have a try ?

If still can't , please share your project, I will test it on my side.

ALice

Re: "Fail to resume target process.Downloading binary to target..."

xiaofangu — Fri, 22 Dec 2017 01:00:26 GMT

Hi,Alice

First,thank you for your suggestion,but it seems don't work on my side.So I attached my project at the end of my question.In my project,I only added two folders to the demo project "MC9S12ZVML128_PMSM_Sensorless".

I hope you can help me.

Best regards.

Re: "Fail to resume target process.Downloading binary to target..."

Alice_Yang — Fri, 22 Dec 2017 06:58:01 GMT

Hello Xiaofan,

Sorry maybe there is some lib needed when build your project, it is error when build it.

I find a case the same error with yours :https://community.nxp.com/message/465762

Recommend you add code part by part, checking which part get the project can't downloaded .

Also check whether overflow.

Alice

Re: "Fail to resume target process.Downloading binary to target..."

xiaofangu — Mon, 25 Dec 2017 01:53:36 GMT

Hello,Alice

Thank you for your suggestion.I read the case you mentioned,but I didn't modify the vector address..

I'm sorry,because I loss to attach the AMMCLIB v1.1.4,so the project errors.I also attached the lib now.Please place the folder at "C:\Freescale\AMMCLIB\MC9S12ZVM_AMMCLIB_v1.1.4".

In brief,I extract files from"MTRCKTSBZVM128_SW_V1.1.exe"which downloaded form NXP.com and it works well,then I add two folders "lin_cfg" and " LIN_Stack" , then the error occurs.

Please give me some suggestion to help me to debug my project.

Best regards.

xiaofan

Re: "Fail to resume target process.Downloading binary to target..."

ZhangJennie — Thu, 28 Dec 2017 09:37:49 GMT

In order to test your problem, I enable srecord generation:

Then I found some conflict inside. For example. 0xFFFF9D is defined twice.

This address belongs to vector table, all the vectors are already defined in vector.c.

your extra adding files should include duplicated definition. check your map file like this

Please revise your adding file to avoid any code conflict.

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: "Fail to resume target process.Downloading binary to target..."

xiaofangu — Tue, 02 Jan 2018 03:08:39 GMT

Hello,Jennie.

Thanks for taking the time to answer the question. It's my fault to post my code without check it,because I cleard the project In order to keep my company's secret.

According to the LIN stack,which downloaded from NXP.com,the LIN module uses sci0 and TIM2 channel,So,I should compile the "Slave_S12ZVML128.npf" and add two line codes :

and now,the SRecorde file is:

so,is it right now? but the error still occurs :

what else should I check?

Any help will be appreciated.

Best Regards.

xiaofan.

Re: "Fail to resume target process.Downloading binary to target..."

xiaofangu — Tue, 02 Jan 2018 05:45:22 GMT

Hello Jennie,

I just check my code,and I find the duplicated definition in my code. now, I fixed the code and my problem seems go away.Thanks for your time.

Have a nice day.

xiaofan.

Re: "Fail to resume target process.Downloading binary to target..."

ZhangJennie — Tue, 02 Jan 2018 09:15:11 GMT

Hi xiaofan.

Just saw your reply. You are welcome.

Good to know your problem was solved.

Have a nice day,

Jennie.

Re: "Fail to resume target process.Downloading binary to target..."

BlackNight — Thu, 01 Mar 2018 19:22:23 GMT

Hi xiaofan,

In any case, you might have a look at the same problem I had a while back:

Problem Occurred: Flash programming with overlapping memory | MCU on Eclipse

Enabling linker warnings helped me a lot on this.

I hope this helps,

Erich

Re: "Fail to resume target process.Downloading binary to target..."

xiaofangu — Wed, 07 Mar 2018 08:51:50 GMT

Hello Erich,

Although my problem has been solved,

Anyway,thanks for your help.

Have a nice day!
xiaofan