Interrupt not firing in debug

beng_ — Mon, 09 Apr 2018 15:49:03 GMT

I'm revisiting an older project that used Code Warrior Studio.

I'm on a new hard-drive, so anything that's not in the Git repository (e.g. stuff generated by Processor Expert, custom project/workspace settings). It seems when I'm in debug the Processor Expert function ADC_Measure() isn't returning because it's waiting for the ADC Conversion Complete Interrupt to clear the ModeFlg, however the interrupt doesn't appear to be firing.

I suspect other interrupts aren't firing in debug either.

However when I'm not in debug, everything seems to work as expected.

In the Debug Configurations options under Debug/Interrupts/Disable Interrupts checkbox is clear.

Re: Interrupt not firing in debug

Alice_Yang — Tue, 10 Apr 2018 02:48:04 GMT

Hello Ben Griffiths,

Could you please tell us which chip you used ?

And which CW version ?Thanks.

Alice

Re: Interrupt not firing in debug

beng_ — Tue, 10 Apr 2018 08:50:39 GMT

Sorry - I should've incldued that.

MK10DX32VFT5 & CodeWarrior 10.6

CodeWarrior Development ToolsのトピックRe: Interrupt not firing in debug

Interrupt not firing in debug

Re: Interrupt not firing in debug

Re: Interrupt not firing in debug