CodeWarrior Development ToolsのトピックRe: CodeWarrior mixed mode

CodeWarrior mixed mode

wangli7975 — Sat, 29 Jul 2017 10:30:38 GMT

Use CodeWarrior Program target firmware,the RUN/PAUSE indicator led is orange,meaning in mixed mode,and program is fail,why? thanks!

Re: CodeWarrior mixed mode

ZhangJennie — Mon, 31 Jul 2017 03:16:54 GMT

Hi Wang,

In order to help you correctly, please provide:

1.Your CodeWarrior version.

2. Your chip part number

3. Test: Create a new project in a new work space, how does it work?

4. problem screenshot

5. If possible, please also mention how to reproduce your problem?

Best Regards.

Jennie Zhang

Re: CodeWarrior mixed mode

wangli7975 — Mon, 31 Jul 2017 11:21:39 GMT

Hello，

1. Your CodeWarrior version.

10.5.1

2. Your chip part number

P1020

2. Test: Create a new project in a new work space, how does it work?

No work；

3. problem screenshot

5. If possible, please also mention how to reproduce your problem?

This problem may only occur on my board.

Thanks

发件人: ZhangJennie

发送时间: 2017年7月31日 11:17

收件人: wang li

主题: Re: - Re: CodeWarrior mixed mode

<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg> NXP Community

Re: CodeWarrior mixed mode

reply from ZhangJennie <https://community.nxp.com/people/ZhangJennie?et=watches.email.thread> in CodeWarrior Development Tools - View the full discussion <https://community.nxp.com/message/928935?commentID=928935&et=watches.email.thread#comment-928935>