CodeWarrior Development ToolsのトピックRe: code warrior 10.4.0 down uboot https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649169#M5692 <HTML><HEAD></HEAD><BODY><P>Hello W<SPAN class="">ei Yang,</SPAN></P><P><SPAN class=""></SPAN></P><P><SPAN class="">1. Please select "Apply Address offset" and specify the u-boot location in the flash programming task configuration panel. You could refer to the document <A href="https://community.nxp.com/docs/DOC-100896">Flash Programmer for CodeWarrior Power Architecture</A> .</SPAN></P><P><SPAN class=""></SPAN></P><P><SPAN class="">2. Have you modified DDR controller configuration in CW configuration file according to your target board? Please create a sample "Downlaod" CodeWarrior project for MPC8309 demo board, and configure the initialization file as yours from Run-&gt;Debug Configuration-&gt;&lt;project&gt;-core00_RAM_8309_Download-&gt;Edit-&gt;Edit-&gt;Initialization, then verify whether this sample program can be executed on your target board successfully. </SPAN></P><P><SPAN class=""></SPAN></P><P><SPAN class="">3. Have you modified the local bus configuration section in CW initialization file according to your target board?</SPAN></P><P><BR />Have a great day,<BR />Yiping</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 15 Nov 2016 03:17:29 GMT yipingwang 2016-11-15T03:17:29Z code warrior 10.4.0 down uboot https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649166#M5689 <HTML><HEAD></HEAD><BODY><P>&nbsp;&nbsp;Hello,</P><P>&nbsp;&nbsp;&nbsp;i use code warrior 10.4.0, i down uboot ,but the type information display as fallow&nbsp;</P><P><span class="lia-inline-image-display-wrapper" image-alt="168503_168503.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/122482i7A12D8C1D6794280/image-size/large?v=v2&amp;px=999" role="button" title="168503_168503.png" alt="168503_168503.png" /></span><span class="lia-inline-image-display-wrapper" image-alt="pastedImage_1.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/9033i49DCF4DEE95955DC/image-size/large?v=v2&amp;px=999" role="button" title="pastedImage_1.png" alt="pastedImage_1.png" /></span></P><P>console message as fallow</P><P>fl::target -lc "ktppc5043-core00_RAM_8309_Download"<BR />fl::target -b 0x2000 0x60000<BR />fl::target -v on -l off<BR />cmdwin::fl::device -d "NAND02GW-eLBC" -o "256Mx8x1" -a 0x0 0xfffffff<BR />cmdwin::fl::image -f "C:\\Users\\Administrator\\Desktop\\down\\u-boot-nandzhu.bin" -t "Binary/Raw Format" -re on -r 0x0 0xfffffff -oe off<BR />cmdwin::fl::erase image<BR /> Beginning Operation ... <BR />------------------------- <BR />Performing target initialization ... <BR />Error: Connect Failed.<BR />Could not connect to the probe (or other debug link)<BR />[CCS last error: CC config string is invalid ](CCSProtocolPlugin)<BR />Error: Connect Failed.<BR />fl::target -lc "ktppc5043-core00_RAM_8309_Download"<BR />fl::target -b 0x2000 0x60000<BR />fl::target -v on -l off<BR />cmdwin::fl::device -d "NAND02GW-eLBC" -o "256Mx8x1" -a 0x0 0xfffffff<BR />cmdwin::fl::image -f "C:\\Users\\Administrator\\Desktop\\down\\u-boot-nandzhu.bin" -t "Binary/Raw Format" -re on -r 0x0 0xfffffff -oe off<BR />cmdwin::fl::erase image<BR /> Beginning Operation ... <BR />------------------------- <BR />Performing target initialization ... <BR /> Downloading Flash Device Driver ... <BR /> Reading flash ID ...<BR />Erasing Sector 0x00000000 to 0x0001FFFF <BR />Erasing Sector 0x00020000 to 0x0003FFFF <BR />Erasing Sector 0x00040000 to 0x0005FFFF <BR />Erasing Sector 0x00060000 to 0x0007FFFF <BR /> Erasing ...<BR />操作被取消。fl::target -lc "ktppc5043-core00_RAM_8309_Download"<BR />fl::target -b 0x2000 0x60000<BR />fl::target -v on -l off<BR />cmdwin::fl::device -d "NAND02GW-eLBC" -o "256Mx8x1" -a 0x0 0xfffffff<BR />cmdwin::fl::image -f "C:\\Users\\Administrator\\Desktop\\down\\u-boot-nandzhu.bin" -t "Binary/Raw Format" -re on -r 0x0 0xfffffff -oe off<BR />cmdwin::fl::erase image<BR />Error: Failed reading return status. Can not read target memory at location: 0x00000000000094D0.Please make sure that the chip selects are properly configured. <BR />The CWPP response code is: CCSProtocolPlugin : Error reading memory <BR />[CCS last error: Core not responding ].<BR /> Beginning Operation ... <BR />------------------------- <BR />Performing target initialization ... <BR /> Downloading Flash Device Driver ... <BR /> Reading flash ID ...<BR />Erasing Sector 0x00000000 to 0x0001FFFF <BR />Erasing Sector 0x00020000 to 0x0003FFFF <BR />Erasing Sector 0x00040000 to 0x0005FFFF <BR />Erasing Sector 0x00060000 to 0x0007FFFF <BR /> Erasing .............................................................<BR /> <BR />Erasing .. <BR /> Erasing .............................................................<BR /> <BR />Erasing .. <BR /> Erasing .............................................................<BR /> <BR />Erasing .. <BR /> Erasing .............................................................<BR /> <BR />Erasing .. <BR /> Erasing .............................................................<BR /> <BR />Erasing .. <BR /> Erasing .............................................................<BR /> <BR />Erasing .. <BR /> Erasing .............................................................<BR /> <BR />Erasing .. <BR /> Erasing ............................ &nbsp;</P><P>could you tell me how to solve it .</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Thanks.</P></BODY></HTML> Thu, 10 Nov 2016 09:17:09 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649166#M5689 威杨 2016-11-10T09:17:09Z Re: code warrior 10.4.0 down uboot https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649167#M5690 <HTML><HEAD></HEAD><BODY><P><BR />Hi Wei Yang,</P><P></P><P>Could you tell us which MCU are you using?</P><P></P><P>Thanks in advance!</P><P></P><P>Best Regards,<BR />Carlos Mendoza<BR />Technical Support Engineer</P></BODY></HTML> Thu, 10 Nov 2016 18:14:11 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649167#M5690 Carlos_Mendoza 2016-11-10T18:14:11Z Re: code warrior 10.4.0 down uboot https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649168#M5691 <HTML><HEAD></HEAD><BODY><P>MPC8309</P></BODY></HTML> Mon, 14 Nov 2016 02:26:16 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649168#M5691 威杨 2016-11-14T02:26:16Z Re: code warrior 10.4.0 down uboot https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649169#M5692 <HTML><HEAD></HEAD><BODY><P>Hello W<SPAN class="">ei Yang,</SPAN></P><P><SPAN class=""></SPAN></P><P><SPAN class="">1. Please select "Apply Address offset" and specify the u-boot location in the flash programming task configuration panel. You could refer to the document <A href="https://community.nxp.com/docs/DOC-100896">Flash Programmer for CodeWarrior Power Architecture</A> .</SPAN></P><P><SPAN class=""></SPAN></P><P><SPAN class="">2. Have you modified DDR controller configuration in CW configuration file according to your target board? Please create a sample "Downlaod" CodeWarrior project for MPC8309 demo board, and configure the initialization file as yours from Run-&gt;Debug Configuration-&gt;&lt;project&gt;-core00_RAM_8309_Download-&gt;Edit-&gt;Edit-&gt;Initialization, then verify whether this sample program can be executed on your target board successfully. </SPAN></P><P><SPAN class=""></SPAN></P><P><SPAN class="">3. Have you modified the local bus configuration section in CW initialization file according to your target board?</SPAN></P><P><BR />Have a great day,<BR />Yiping</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 15 Nov 2016 03:17:29 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/code-warrior-10-4-0-down-uboot/m-p/649169#M5692 yipingwang 2016-11-15T03:17:29Z