CodeWarrior Development ToolsのトピックRe: CMSIS and Codewarrior

CMSIS and Codewarrior

tobiashofbaur — Tue, 04 Apr 2017 08:36:22 GMT

Hello,

for an ARM Cortex M4 project, i want to use the CPU specific instructions for sqrt using the ARM Toolchain with the ARM Compiler.

I can sucessfully include CMSIS into the project, however, it seems, that the necessary macros are not generated (e.g. compiler etc.)

Moreover, if I strip everything unnecessary from CMSIS and onyl include the bare VSQRT in the syntax of CMSIS

__asm("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in)); (wrapped in a function)

the compiler complains about the constraints.

Do you know what is going wrong, or what I have to change? Unfortunately i cannot find a detailed documentation on the Freescale Arm Compiler or the vsqrt.

Thanks

Tobias

Re: CMSIS and Codewarrior

Carlos_Mendoza — Wed, 05 Apr 2017 14:29:21 GMT

Hi Tobias,

Which Cortex M4 MCU are you using?

Thanks in advance!

Best Regards,
Carlos Mendoza
Technical Support Engineer

Re: CMSIS and Codewarrior

tobiashofbaur — Wed, 05 Apr 2017 14:35:12 GMT

Hi Carlos,

thank you for the reply.

It is a MK70FX512VMJ15

Re: CMSIS and Codewarrior

Carlos_Mendoza — Wed, 05 Apr 2017 21:23:18 GMT

Hi Tobias,

I think that the following post created by our colleague Erich Styger might be helpful for you, it explains the usage of the ARM CMSIS Libraries with Kinetis in CodeWarrior:

Tutorial: Using the ARM CMSIS Library | MCU on Eclipse

Hope it helps!

Best Regards,
Carlos Mendoza
Technical Support Engineer

Re: CMSIS and Codewarrior

tobiashofbaur — Thu, 06 Apr 2017 06:00:58 GMT

Hi Carlos,

I followed that example, and it works as far as it is applicable. However in our project we cannot use the GCC compiler, but have to use the Freescale ARM Compiler ( mwccarm )

It seem, this does not generate the necessary macros for cmsis to work/ does not recognize the cmsis syntax.

Best

Tobias

Re: CMSIS and Codewarrior

Carlos_Mendoza — Tue, 11 Apr 2017 17:07:04 GMT

Hi Tobias,

Which errors are you getting? Could you share an example project so I can replicate this on my side?

Thanks in advance for your response!

Best Regards,
Carlos Mendoza
Technical Support Engineer

Re: CMSIS and Codewarrior

tobiashofbaur — Wed, 12 Apr 2017 07:37:03 GMT

Hi Carlos,

I attached a minimal "working" example. The project has the same setting as our main project.

As it is, it does not compile. If I comment the asembler line, it does compile.

If I change the compiler to ARM Ltd Windows GCC Compiler, it does compile with the asembler line.

Thank you for your help

Best

Tobias