topic USB-ML-12 (USB BDM Multilink) is not working in CodeWarrior Development Tools

USB-ML-12 (USB BDM Multilink) is not working

vigneshkumarp — Wed, 21 Sep 2016 11:12:22 GMT

As we are using The USB-ML-12 (USB BDM Multilink) for programming the controller, one of the multilink is not working right now but the other one is working fine.

While we connect to the USB without host processor board the YELLOW led is glowing not the BLUE. When we connect to the target processor it remains the same i.e., only YELLOW led glows. We have updated the drivers, uninstalled the drivers and installed again but it doesn't works out. Is there any problem with hardware?? If so how can we identify it??

Thanks in advance...

Re: USB-ML-12 (USB BDM Multilink) is not working

vigneshkumarp — Wed, 21 Sep 2016 11:14:26 GMT

Re: USB-ML-12 (USB BDM Multilink) is not working

Alice_Yang — Thu, 22 Sep 2016 03:08:59 GMT

Hello ,

- From the technical summary document , we know the two light function :

http://www.pemicro.com/downloads/tech_summary/usb-ml-12%20tech%20summary%201.05.pdf

So i think your PC have not detect the USB Mutilink debugger interface .

- What the version of your debugger, and what system of your PC ?

If the debugger is REV.A , it not supported the newest operating system .

Hope it helps

Alice

Re: USB-ML-12 (USB BDM Multilink) is not working

vigneshkumarp — Thu, 22 Sep 2016 06:11:05 GMT

Hi,

Am using Rev.C of USB-ML-12E in W7 32 bit OS. We are having the another one of same working fine. Will there be any hardware issues?? How can we check it?

Re: USB-ML-12 (USB BDM Multilink) is not working

Alice_Yang — Thu, 22 Sep 2016 07:29:13 GMT

Hello VIGNESHKUMAR,

Sorry i don't know the hardware of the debugger clearly . It is developed by P&E Micro company ,

i recommend you ask the P&E engineer at here : P&E Microcomputer Systems: Over 30 years as an Industry leader in Embedded Systems Development Tools, debug probes, and …

About the debugger hardware issue , i also search help at that place , they will reply with rapid speed .

Hope it helps !

Alcie

Re: USB-ML-12 (USB BDM Multilink) is not working

vigneshkumarp — Thu, 22 Sep 2016 07:54:26 GMT

Hi Alice_Yang,

Thank you for your response. I'll check into that.