CodeWarrior Development ToolsのトピックCodeWarrior Tap Configuration (Connect to Network) https://community.nxp.com/t5/CodeWarrior-Development-Tools/CodeWarrior-Tap-Configuration-Connect-to-Network/m-p/288913#M475 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>I am currently working with the Codewarrior Tap. When i received the tap, I tried to manually configure the tap by netparam. The first time i tried to establish a telnet session, I could do so successfully. </P><P>As per the given step in the manual, I changed the hostname to lab01. But the telnet session ended abruptly. From then on, I am unable to establish another telnet session. </P><P>Further, I am unable to view the device on the internet.</P><P>I am unable to locate the IP address of the tap.</P><P>When i use the CCS to locate the tap, I am unable to find any device attached to the network.</P><P>Please provide me assistance either to restore the tap to the factory setting or to Connect to the network.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Thanks in advance,</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Sriram </P></BODY></HTML> Tue, 11 Feb 2014 06:41:52 GMT sriramvasudevan 2014-02-11T06:41:52Z CodeWarrior Tap Configuration (Connect to Network) https://community.nxp.com/t5/CodeWarrior-Development-Tools/CodeWarrior-Tap-Configuration-Connect-to-Network/m-p/288913#M475 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>I am currently working with the Codewarrior Tap. When i received the tap, I tried to manually configure the tap by netparam. The first time i tried to establish a telnet session, I could do so successfully. </P><P>As per the given step in the manual, I changed the hostname to lab01. But the telnet session ended abruptly. From then on, I am unable to establish another telnet session. </P><P>Further, I am unable to view the device on the internet.</P><P>I am unable to locate the IP address of the tap.</P><P>When i use the CCS to locate the tap, I am unable to find any device attached to the network.</P><P>Please provide me assistance either to restore the tap to the factory setting or to Connect to the network.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Thanks in advance,</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Sriram </P></BODY></HTML> Tue, 11 Feb 2014 06:41:52 GMT https://community.nxp.com/t5/CodeWarrior-Development-Tools/CodeWarrior-Tap-Configuration-Connect-to-Network/m-p/288913#M475 sriramvasudevan 2014-02-11T06:41:52Z