topic How to use Burner.exe in CodeWarrior Development Tools

How to use Burner.exe

davidzhou — Wed, 13 Jul 2016 15:53:57 GMT

Hi,

I have K60 Tower boards: TWRK60F120. and CodeWarrior Version installed: CW MCU v10.6.4

In many of your documents, it describes using burner.exe to do flash programming. But I can not find the burner.exe in my installed folder. What needs to be installed for the burner.exe. Is there any way that burner.exe can be run as standalone application?

Thank you,

David Zhou

Re: How to use Burner.exe

BlackNight — Wed, 13 Jul 2016 18:07:21 GMT

The burner.exe is located inside your CW installation:

<CW>\MCU\prog\burner.exe

It gets installed if you install the S08 tools, so maybe you don't have them installed with CodeWarrior?

On the other side: the burner.exe cannot do flash programming. But it can create files like S19 files which are used by production programmers.

I hope this helps,

Erich

Re: How to use Burner.exe

davidzhou — Thu, 14 Jul 2016 17:45:23 GMT

Thanks, Erich.

David

Re: How to use Burner.exe

akhilkm — Fri, 25 Jan 2019 06:42:04 GMT

Hi,

I am not able to install CW 6.3 (Classic) which downloaded from web for HC08 controller. How can i install this to my Windows 8.1PC?

Thanks,

Akhil.

Re: How to use Burner.exe

BlackNight — Fri, 25 Jan 2019 16:02:55 GMT

The burner is as well installed with CodeWarrior for MCU11.x (https://www.nxp.com/support/developer-resources/software-development-tools/codewarrior-development-tools/codewarrior-leg… ), so best if you install that version which supports the later Windows versions.

I hope this helps,

Erich

Re: How to use Burner.exe

akhilkm — Tue, 29 Jan 2019 05:12:30 GMT

Hi Erich,

Thanks. So can i convert a .abs file into phyiscal s19 file by using this utility?

Re: How to use Burner.exe

BlackNight — Tue, 29 Jan 2019 10:25:47 GMT

yes.

Re: How to use Burner.exe

akhilkm — Wed, 30 Jan 2019 10:04:33 GMT

Hi Erich,

i am not able to load a new .abs file into the utility it expects file formats like .ini and .pjt. How to convert this .abs to s19?

Thanks,

Akhil.

Re: How to use Burner.exe

BlackNight — Wed, 30 Jan 2019 16:03:03 GMT

The commands are passed by the -F option to the utility. The .ini file is used for storing configuration. Have a look at the manual or see S-Record Manipulation with GNU objcopy and Burner Utility | MCU on Eclipse .

See C:\nxp\CW_MCU_V6.3\Help\PDF\Build_Tools_Utilities.pdf, Chapter "Burner Utility" and "Interactive Burner GUI".

I hope this helps,

Erich