PEx Changing A/D 8bit to 10bit Errors

michaelsteffenf — Mon, 06 Jun 2016 19:18:24 GMT

The MCU p/n is S9S12G192F0CLL.

Originally, the project was setup to use the A/D in 8-bit
mode but, now I need to change it to 10-bit mode. I can easily change the mode
from 8-bit to 10-bit in Processor Expert but, when I make the project again, I
get unusual errors. The errors show up in msCANreg.h and I have absolutely no
idea why errors would show up in a header file. If I change back to 8-bit mode
and attempt to compile again, the same errors appear. On the other hand, if I
leave the A/D in 8-bit mode make a change only to our own C code in the project,

I do not get any errors.

See attachments.

Michael Steffen

Senior Field Applications Engineer

Member of the Technical Staff

NXP Semiconductors

Original Attachment has been moved to: EOLT_85PERCENT_PWM.zip

Re: PEx Changing A/D 8bit to 10bit Errors

Alice_Yang — Tue, 07 Jun 2016 09:40:23 GMT

Hello Michael Steffen,

Sorry , i have not find the MSCAN component on your project ,

while you use the MSCAN functions , have i misunderstand something ?

Alice

CodeWarrior Development ToolsのトピックRe: PEx Changing A/D 8bit to 10bit Errors

PEx Changing A/D 8bit to 10bit Errors

Re: PEx Changing A/D 8bit to 10bit Errors