CodeWarrior Development ToolsのトピックRe: MCU won't erase. Timeout.

MCU won't erase. Timeout.

dementeddigital — Fri, 22 Jan 2016 19:10:16 GMT

I'm attempting to program my board with some code using CW 10.6.4 and a Multilink FX, and the device won't erase. What's the best way to root cause this?

I get this:

fl::target -lc "LC for Simple Flash"

fl::target -b 0x1ffff000 0x4000

fl::target -v off -l off

cmdwin::fl::device -d "FTMRE_PFlash128RAM16" -o "32kx32x1" -a 0x0 0x1ffff

cmdwin::fl::erase all

Beginning Operation ...

-------------------------

Performing target initialization ...

Device FTMRE_PFlash128RAM16

Erasing .............

Error: Erase Command Failed. Operation timeout.

Device FTMRE_PFlash128RAM16

An invalid preference was passed to the GDI protocol plugin(ARM GDI Protocol Adapter)

Error: Erase Command Failed.Operation timeout.

Re: MCU won't erase. Timeout.

ZhangJennie — Mon, 25 Jan 2016 04:43:08 GMT

Hi Dan,

to solve your problem, we need to know:

1. your chip part number?

2. create a brand new workspace folder, if you create a new project with wizard, can you download the program to target via CW DEBUGGER?

3. test simple flash based on step2. how does it work?

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------