LS1021ATWR : Lauterbatch

amolshrotri — Fri, 15 Apr 2016 20:18:40 GMT

Hello,

I am trying to connect Lauterbach with LS1021ATWR, But getting error on SYSTEM.UP as "debug port fail".

I am using below commands

SYSTEM.CPU CORTEXA7MPCORE

SYSTEM.CONFIG DAPIRPRE 8.

SYSTEM.CONFIG DAPDRPRE 1.

SYSTEM.Option ResBreak OFF

CORE.ASSIGN 1.

SYSTEM.Up

Re: LS1021ATWR : Lauterbatch

yipingwang — Wed, 20 Apr 2016 09:15:40 GMT

Hello AMOL SHROTRI,

For Lauterbach and Trace32 problem, you's better contact LAUTERBACH company LAUTERBACH DEVELOPMENT TOOLS.

For LS1021ATWR, make sure there is valid RCW on the target board, if no, you could use hard-coded RCW.

Switch settings for LS1021A TWR X3 - PROC REV 1.0

SW2 : 0x8F = 1000 1111

SW3 : 0x61 = 0110 0001

Switch settings fro LS1021A TWR X3 - PROC REV 2.0

SW2 : 0x8F = 1000 1111

SW3 : 0x65 = 0110 0101

To enable CMSIS-DAP you have to change SW2[8] = 0

Have a great day,
Yiping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic LS1021ATWR : Lauterbatch in CodeWarrior Development Tools

LS1021ATWR : Lauterbatch

Re: LS1021ATWR : Lauterbatch