topic Re: Flash programmer for 56F8xx stand alone in CodeWarrior Development Tools

Flash programmer for 56F8xx stand alone

giamma — Wed, 20 Jan 2016 11:20:07 GMT

Qualcuno sa suggerirmi come programmare la flash dei DSP serie 56F8xx in Windows 7 con un software che non sia CodeWarrior

Re: Flash programmer for 56F8xx stand alone

trytohelp — Wed, 20 Jan 2016 12:40:10 GMT

Hi,

Translate with google:

Suggest someone knows how to program the flash of the DSP series 56F8xx in Windows 7 with software that is not CodeWarrior

I think the answer will depend of the interface used ?

I've found some information on the web:

DSP56F801|Digital Signal Controller|NXP

Interesting doc at:

http://cache.nxp.com/files/product/doc/AN1926.pdf

Have a great day,
Pascal
NXP Technical Support

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Flash programmer for 56F8xx stand alone

TICS_Fiona — Thu, 21 Jan 2016 06:15:26 GMT

Hello Giovanni

The programming tools for 56F80x we supply include:

1) CodeWarrior for DSP56800/E

2) Flash_over_jtag

3) Bootlader.

1) and 2) are both using JTAG interface. 3) uses SCI or CAN interface.

flash_over_jtag can only support parallel connection, it does not support USB interface. It does not support Windows 7 either. I attached this tool.

Best Regards

Fiona Kuang

Technical Information & Commercial Support

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------