topic Re: Compile for C Vs C++? in CodeWarrior Development Tools

Compile for C Vs C++?

howarddelfava — Mon, 25 Apr 2016 18:42:53 GMT

Code Warrior for MCU Version 10.6.4 Build ID 150416 for windows.

Just changed from code warrior professional Eval version to purchased CW standard. I'm re-building my files and getting a "C++ is not supported by the current set of licenses" error. None of my code is written in C++, only C. How can I fix the project?

Thanks

Re: Compile for C Vs C++?

TICS_Fiona — Tue, 26 Apr 2016 02:41:22 GMT

Hello Howard

C++ is only supported in Professional Edition. For details, please refer to:

http://www.freescale.com/files/soft_dev_tools/doc/fact_sheet/950-00437.pdf

And could you please check whether you enabled C++ feature in the project? Please disable the C++ settings of the project, see the attached screenshot for MPC56xx. It is similar for other project.

Hope it helps! If not, could you please attach an example project to help us reproduce the problem?

Best Regards

Fiona Kuang

TIC - Technical Information Center

Re: Compile for C Vs C++?

howarddelfava — Tue, 26 Apr 2016 11:34:23 GMT

Hi Fiona.

Thanks for the reply.

Yes, I’m aware of the lack of C++ support for the standard version. All of my code is written in C, I do not require C++.

I suspect something got set in my project that I originally built under the Pro version that implies C++, which I don’t need.

I’ve attached a (scrubbed) version of my code.

I also checked the settings per the screen shot you sent. The settings are a little different, but I think they are OK.

See below:

Thanks!