CodeWarrior Development Tools中的主题 Re: PBL/RCW for T1024

PBL/RCW for T1024

gouravjain — Fri, 22 Apr 2016 09:08:15 GMT

Hello All,

I am beginner for freescale processorsand handling first time T1024 processor. Can any body tell me how to open RCW configuration settings on Codewarrior tool?? I'm not able to find how to create QorIQ project in Codewarrior 10.5.1 tool.

Help would be highly appreciated..

Thanks,

Gourav

Re: PBL/RCW for T1024

addiyi — Fri, 22 Apr 2016 09:14:23 GMT

You have to install QCVS on top of CW for PA. For this you have to go to Help > Install New Software and select as updatesite: FSL PA QCVS - http://freescale.com/lgfiles/updates/Eclipse/PA10_5_1/com.freescale.pa.qcvs_win.

Adrian

Re: PBL/RCW for T1024

gouravjain — Fri, 22 Apr 2016 10:37:01 GMT

Hi Adrian,

Thanks for your prompt reply.... but its giving below error while followed your instruction..

Forbidden

You don't have permission to access /lgfiles/updates/Eclipse/PA10_5_1/com.freescale.pa.qcvs_win/ on this server.

gourav

Re: PBL/RCW for T1024

addiyi — Fri, 22 Apr 2016 11:34:29 GMT

That link can be use only in Help > Install New Software. So, open CW and go to Help > Install New Software, select the link and the QCVS 4.5 as in below image.

Re: PBL/RCW for T1024

gouravjain — Mon, 25 Apr 2016 04:07:07 GMT

Hi Adrian,

After downloading around 40-50 % (not only QCVS tool even plugin also) im getting below error,

An error occurred while collecting items to be installed

session context was:(profile=PlatformProfile, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).

Unable to read repository at http://freescale.com/lgfiles/updates/Eclipse/PA10_5_1/com.freescale.pa.qcvs_win/plugins/org.eclipse.nebula.widgets.nattable.core_1.1.1.201409122046.jar.

Read timed out.

Pls help me out from this problem .

Thanks,

Gourav

Re: PBL/RCW for T1024

gouravjain — Mon, 25 Apr 2016 04:52:56 GMT

And one more question, cant be use Codewarrior 10.3.3v for T1024 processor??

Re: PBL/RCW for T1024

chenxiaoyong — Mon, 25 Apr 2016 14:11:08 GMT

I downloaded and installed this tool successfully based on above steps, and my CodeWarrior is as following:

Installed Products:

- CodeWarrior for Power Architecture

Version: 10.5.1

Build Id:160128

Hope this will help you, I am also debugging this device, some problems as well.

T1024 in hardcoded mode

Hope somebody can help on this problem, thanks.

Re: PBL/RCW for T1024

addiyi — Tue, 26 Apr 2016 12:04:24 GMT

CodeWarrior for PA 10.3.3 doesn't provide support for T1024. Please use 10.5.1. Also, about the QCVS installation please try again or search on nxp.com/qcvs the offline installation package.

Adrian

Re: PBL/RCW for T1024

gouravjain — Thu, 28 Apr 2016 06:48:38 GMT

Hi Adrian,

Thanks for your prompt help. Now i followed offline way to install QCVS and it worked in my system.

Gourav