HIWAVE MCU speed question

simo — Tue, 23 Jun 2015 10:52:35 GMT

Hello all,

I have a P&E multilink Universal programmer. I am using MC9s12c µP with 8MHz clock. What should be MCU speed in Flash page? I have always 1.41MHz even I have 8MHz clock. Is my clock dead or do I have to set some settings somewhere? Scope shows nice 8MHz.

Should I do anything else than set CLKSEL = 0x00; in SW?

This happened now with 4 different µP. Problem in Multilink firmware?

Re: HIWAVE MCU speed question

trytohelp — Wed, 24 Jun 2015 11:28:26 GMT

Hi,

You're using P&E Multilink Universal interface.

The last version is Rev C.

I don't know if this can help but a new firmware version has already solved problem with this interface under MCU V10.6 Update4 (Eclipse) and on CW for MCF V7.2 (Classic).

Please have a look to the post:

Problem with Multilink Rev C - not running after MCU V10.6 Update4 installed & CW for MCF V7.2

Have a great day,
Pascal
Freescale Technical Support
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic HIWAVE MCU speed question in CodeWarrior Development Tools

HIWAVE MCU speed question

Re: HIWAVE MCU speed question