CodeWarrior Development ToolsのトピックRe: Programming custom MCS08DZ60 through Evaluation Board?

Programming custom MCS08DZ60 through Evaluation Board?

pawankumar — Fri, 07 Aug 2015 08:41:58 GMT

Hi Folks,

You have been helping me throughout the time when I face trouble. Am thankful to you.

I have a small query.

I am able to program code. That's fine. I would be getting a prototype PCB with the same controller in it. The board will have a 6 pin BDM port in it.

Earlier, I had planned to buy the USB Multi Link BDM or the ULINK, which is an upgraded version of that. But now, I am thinking of options wherein I can make use of EVM's USB-BDM interface to program my external controller.

Is this possible?

Kindly advise.

Pawan

Re: Programming custom MCS08DZ60 through Evaluation Board?

ZhangJennie — Mon, 10 Aug 2015 03:21:24 GMT

Hi Pawan,

we ever asked engineer from P&E to confirm their position concerning using the on-board BDM module that is present in many of their demo boards to program and debug a target external to the demo board.

P&E's answer is that these BDM Modules are low cost BDM modules that are not intended to be used for anything else other than program the device present on the demoboard. Even attempting to program the same derivative part number but on an external target is not guaranteed it will work. P&E does not support this and Freescale support should not assist customers who try to hack these boards to turn them into programmers.

does this help you?

Have a great day,
Zhang Jun

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Programming custom MCS08DZ60 through Evaluation Board?

pawankumar — Mon, 10 Aug 2015 04:30:36 GMT

Okay Zhang,

Thanks for the answer.

Pawan

Re: Programming custom MCS08DZ60 through Evaluation Board?

ZhangJennie — Tue, 11 Aug 2015 02:26:47 GMT

you are welcome.

Zhang Jun