topic Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ] in CodeWarrior Development Tools

Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

igorvereshchagi — Tue, 22 Sep 2015 12:55:35 GMT

Hello

Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

What I need to check to fix this error?

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

marius_grigoras — Tue, 22 Sep 2015 13:01:48 GMT

Hi,

Make sure you have the DIP SW settings set up as for P2020 and not for P2010 (details are in the CW stationary project).

Regards,

Marius

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

igorvereshchagi — Tue, 22 Sep 2015 13:04:37 GMT

I have no DIP switches on the board

Which pins must be checked?

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

igorvereshchagi — Tue, 22 Sep 2015 13:07:10 GMT

There are a lot of config pins may be pulled high or low

Which of them are significant for this issue?

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

igorvereshchagi — Wed, 23 Sep 2015 11:53:02 GMT

Hi, Marius

Help me, please

Here is ccs log

ccs_open

ipaddr = 127.0.0.1

port = 41475

timeout = 15

serverh = 0

ccs_open; ccs_error = 10

Error message: Connection refused

ccs_open

ipaddr = 127.0.0.1

port = 41475

timeout = 15

serverh = 0

ccs_open; ccs_error = 10

Error message: Connection refused

ccs_open

ipaddr = 127.0.0.1

port = 41475

timeout = 15

serverh = 0

ccs_open; ccs_error = 0

ccs_get_connection_count

serverh = 0

count = 1

ccs_get_connection_count; ccs_error = 0

ccs_available_connections

serverh = 0

count = 0

ccs_available_connections; ccs_error = 0

ccs_available_connections

serverh = 0

count = 0

ccs_available_connections; ccs_error = 0

ccs_config_cc

serverh = 0

config_string = cwtap:10.1.1.115

ccs_config_cc; ccs_error = 0

ccs_available_connections

serverh = 0

count = 1

ccs_available_connections; ccs_error = 0

ccs_set_timeout

serverh = 0

timeout = 15

ccs_set_timeout; ccs_error = 0

ccs_cc_status

serverh = 0

cc = 0

ccs_cc_status; ccs_error = 0

ccs_cc_version

serverh = 0

cc = 0

version.major = 0

version.minor = 0

ccs_cc_version; ccs_error = 0

ccs_set_timeout

serverh = 0

timeout = 15

ccs_set_timeout; ccs_error = 0

ccs_available_connections

serverh = 0

count = 1

ccs_available_connections; ccs_error = 0

ccs_config_server

serverh = 0

cc = 0

server_config = 0

value = 1000

ccs_config_server; ccs_error = 0

ccs_get_config_chain

serverh = 0

device_list: (size = 0)

ccs_get_config_chain; ccs_error = 0

ccs_config_chain

serverh = 0

cc = 0

device_list: (size = 1)

device[0]:: core_type=mpc8572(102)

ccs_config_chain; ccs_error = 0

ccs_get_config_chain

serverh = 0

device_list: (size = 3)

ccs_get_config_chain; ccs_error = 0

ccs_get_config_chain

serverh = 0

device_list: (size = 3)

device[0]:: core_type=mpc8572(102)

device[1]:: core_type=Draco/m HIP8(53)

device[2]:: core_type=Draco/m HIP8(53)

ccs_get_config_chain; ccs_error = 0

ccs_send_message

coreh = [serverh:0;cc_index:0;chain_pos:1]

message = 3

ccs_send_message; ccs_error = 0

ccs_stop_core

coreh = [serverh:0;cc_index:0;chain_pos:1]

ccs_stop_core; ccs_error = -2147418099

Error message: ELF is not in expected HALT mode

ccs_read_register

coreh = [serverh:0;cc_index:0;chain_pos:1]

index = 287

count = 1

size = 4

value: (size = 4)

00000000

ccs_read_register; ccs_error = -2147418098; duration=10 ms

Error message: ELF is not in expected HALT mode

ccs_reset_to_mixed

chain_pos: (size = 3) { 0 (halt) 1 (run) 2 (halt) }

ccs_reset_to_mixed; ccs_error = 39; duration=2810 ms

Error message: Draco/m HIP8: ELF is not in expected HALT mode

ccs_get_subcore_error

serverh = 0

cc = 0

error = -2147483635

chain_pos = 1

ccs_get_subcore_error; ccs_error = 0; duration=0 ms

ccs_available_connections

serverh = 0

count = 1

ccs_available_connections; ccs_error = 0

ccs_delete_cc

serverh = 0

count = 0

ccs_delete_cc; ccs_error = 0

ccs_kill_server

serverh = 0

ccs_kill_server; ccs_error = 0

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

marius_grigoras — Wed, 23 Sep 2015 14:05:19 GMT

Hi,

I think the board is a custom one and not freescale specific. Using the P2010 SoC from CW connection is changing something?

Thank you,

Marius

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

igorvereshchagi — Thu, 24 Sep 2015 12:51:37 GMT

Hi,

Yes, the board is custom

I have tried to use P2010 option in connection settings, nothing changing

Thank you

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSProtocolPlugin : Failed to reset the target [CCS last error: Draco/m HIP8: ELF is not in expected HALT mode ]

igorvereshchagi — Fri, 25 Sep 2015 08:53:10 GMT

Hi,

Seems to be HW problems, suggesting TRST line do not contacting to chip

Checking this point

Thank you

Re: Trying to connect P2020 on custom board with CodeWarrior and CWTAP. An error is appearing: CCSPr

D15 — Thu, 15 Aug 2024 09:46:27 GMT

May I ask if the issue has been resolved? I am currently experiencing the same problem as you.