CodeWarrior Development Tools中的主题 Re: The USBTAP driver upgrade was not successful.

The USBTAP driver upgrade was not successful.

craigj — Mon, 25 Aug 2014 09:31:45 GMT

I'm trying to install codewarrior on my win7 64 PC, I recently posted getting some help regarding installing CW on another PC and got the following replies which were very helpful.

https://community.freescale.com/thread/329298

So that got us up on running on both Windows XP and Windows 7 which we needed.

However I've now tried to reproduce this setup on my own Windows7 64 development box. However it was not a success (it connected and talked to the tap but gave some other error which I now forget) but during this process I decided to uninstall and repeat my steps to make sure I took the correct patches etc etc.

However when I now try reinstall I get the following error....

In addition the installation window has the following in it

The same steps seem to have worked elsewhere so is this a 64 bit windows problem or is it something else...

thanks in advance

regards

Craig

Re: The USBTAP driver upgrade was not successful.

yipingwang — Tue, 26 Aug 2014 02:16:40 GMT

Hello Craig,

Please note don't plug in USB TAP during CodeWarrior 8.8 or any patch installation.

I think probably that is the cause.

Have a great day,
Yiping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: The USBTAP driver upgrade was not successful.

craigj — Tue, 26 Aug 2014 07:26:21 GMT

Thanks Yiping for your advice, however I definitely did not have the device plugged in during this process.

I did however have another device plugged in, I wonder if perhaps that confused the installer somehow?

I'll try with absolutely nothing plugged in.

Thanks for your reply.

Re: The USBTAP driver upgrade was not successful.

addiyi — Tue, 26 Aug 2014 07:29:45 GMT

Tou can try to follow the steps from ccs\drivers\ccs_drivers_installation_help.txt.

Adrian

Re: The USBTAP driver upgrade was not successful.

craigj — Tue, 26 Aug 2014 08:29:53 GMT

Thanks Adrian

Followed the uninstall steps for the USB driver and all is well again, at least on the install front. Now I need to see if it'll talk to my target!! but that's another story.