Debugging U-Boot in Flash Memory After the MMU is Enabled is not working

subramanyan — Thu, 18 Dec 2014 03:40:38 GMT

After following previous steps we are doing attach to process and stopping debugging and in symbolic window in board.c file for the function board_init_f, hardware break point is set

after that we are doing following steps

Debug > EPPC > Hard Reset and

Project > Run

and expected result => When execution reaches the hardware breakpoint, the debugger halts execution

but that is not happening

in debugger window it says u-boot is executing , stop running to debug

Re: Debugging U-Boot in Flash Memory After the MMU is Enabled is not working

subramanyan — Thu, 18 Dec 2014 04:03:07 GMT

continuing the query...

please find the attachment of ccs log which I got during this..

in debugger window it says as follows

please find the following of ccs log which I got during this..

MBIST: core is RUNNING!

CCS: 0000 : ccs_stop_core

CCS: : coreh = [serverh:0;cc_index:0;chain_pos:0]

CCS: : ccs_stop_core; ccs_error = 0

CCS: 0000 : ccs_write_reg

CCS: : coreh = [serverh:0;cc_index:0;chain_pos:0]

CCS: : index = 309

CCS: : count = 1

CCS: : value: (size = 1)

CCS: : 0000000000

CCS: : ccs_write_reg; ccs_error = 0; duration=10 ms

CCS: 0000 : ccs_write_reg

CCS: : coreh = [serverh:0;cc_index:0;chain_pos:0]

CCS: : index = 1010

CCS: : count = 1

CCS: : value: (size = 1)

CCS: : 0000000000

CCS: : ccs_write_reg; ccs_error = 0; duration=0 ms

CCS: 0000 : ccs_run_core

CCS: : coreh = [serverh:0;cc_index:0;chain_pos:0]

CCS: : ccs_run_core; ccs_error = 0

CCS: 0000 : ccs_stop_core

CCS: : coreh = [serverh:0;cc_index:0;chain_pos:0]

CCS: : ccs_stop_core; ccs_error = 0

CCS: 0000 : ccs_run_core

CCS: : coreh = [serverh:0;cc_index:0;chain_pos:0]

CCS: : ccs_run_core; ccs_error = 0

CCS: 0000 : ccs_get_messages

CCS: : coreh = [serverh:0;cc_index:0;chain_pos:0]

CCS: : message: (size = 0)

CCS: : ccs_get_messages; ccs_error = 0

CCS: 0000 : ccs_delete_cc

CCS: : serverh = 0

CCS: : count = 0

CCS: : ccs_delete_cc; ccs_error = 0

CCS: 0000 : ccs_kill_server

CCS: : serverh = 0

CCS: : ccs_kill_server; ccs_error = 0

CodeWarrior Development ToolsのトピックDebugging U-Boot in Flash Memory After the MMU is Enabled is not working

Debugging U-Boot in Flash Memory After the MMU is Enabled is not working

Re: Debugging U-Boot in Flash Memory After the MMU is Enabled is not working