CodeWarrior Development ToolsのトピックRe: CW for MCU 10.6 12Z compiler, linker, assembler versions

CW for MCU 10.6 12Z compiler, linker, assembler versions

Foof223 — Tue, 20 Jan 2015 10:17:33 GMT

Hi,

I'm trying to find out the versions of the compiler, linker, and assembler used in Codewarrior 10.6 for MCUs. I'm using it with the 12Z processor. I've looked under help -> about -> installed products. There the 12Z compiler is shown, but not the linker or assembler. Any idea how to find these?

Thanks!

Re: CW for MCU 10.6 12Z compiler, linker, assembler versions

Alice_Yang — Tue, 20 Jan 2015 12:01:57 GMT

Hi Craig,

CW10.6 's compiler is gcc ,so the gcc version is the compiler version.

And the Assembler version is check the "arm-none-eabi-as.exe" version like this :

And the linker version check the"arm-none-eabi-ld.exe"

And you show is the c/c++ compiler version.

Best Regards,

Alice

------------------------------------------------------------------------------------------

If this post answers your question, please click the Correct Answer button.

-----------------------------------------------------------------------------------

If this post help your question, please click the helpful Answer button.

Re: CW for MCU 10.6 12Z compiler, linker, assembler versions

Foof223 — Tue, 20 Jan 2015 13:27:16 GMT

Hi Alice,

Thanks very much for your help! I'm a bit confused because I see in my map file the compiler shown as: Compiler Version: C/C++ Compiler for S12/L-ISA v-5.0.37 build 14244

I'm working with a 3rd party software developer who will be writing a bootloader for the project and he needs the compiler, linker, and assembler versions to make sure his code will work for me.

Kind regards,

Craig

Re: CW for MCU 10.6 12Z compiler, linker, assembler versions

Alice_Yang — Wed, 21 Jan 2015 10:29:37 GMT

Hi Craig,

I do not know the relationship among them , while I said above is the way to check the compiler assembler linker version .

Alice