FRDM-K22F openSDA option doesn't appear on CW10.6

josealonsovalle — Fri, 27 Mar 2015 04:24:21 GMT

Hi everyone,

i am trying to create a project in CW 10.6 with the FRDM board K22F-120Mhz, but in the connections window doesn't appear the OpenSDA option, what means this?, beacuse i already installed the firmware to the openSDA at the frdm, and i have been working properly with the FRDM KL25Z and this board works good. , or, i am forced to use the Kinetis design studio to work with the K22F frdm board??,

Can somebody help me please??

i am not shure which of these MCU i must select, but however any of the boards haven't the option openSDA..

Re: FRDM-K22F openSDA option doesn't appear on CW10.6

Jorge_Gonzalez — Fri, 27 Mar 2015 05:14:32 GMT

Hello Alonso:

CodeWarrior does not support K22FN512 as the one in FRDM-K22F. You have to use KDS or a third-party IDE: IDEs for Kinetis MCUs|Freescale.

Those K22 devices you see are legacy K22_120 parts, that is why those are still supported by CW. More details here: Kinetis K22_120 MHz devices.

Regards!,

Jorge Gonzalez

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Re: FRDM-K22F openSDA option doesn't appear on CW10.6 in CodeWarrior Development Tools

FRDM-K22F openSDA option doesn't appear on CW10.6

Re: FRDM-K22F openSDA option doesn't appear on CW10.6