does anybody have a dsp56805 config file for flash programmer v1.2?

danielmak — Tue, 03 Feb 2015 00:37:42 GMT

Does anybody have a DSP56805 config file for Flash Programmer v1.2?

Re: does anybody have a dsp56805 config file for flash programmer v1.2?

TICS_Fiona — Tue, 03 Feb 2015 03:42:44 GMT

56800E Flash Programmer only works for 56800E, and it doesn't not support 56800 product.

To program DSP56F805, please use CodeWarrior, or flash_over_jtag.

CodeWarrior v8.3 can be downloaded from:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=CW-56800E-DSC

It supports programming with USBTAP and Parallel.

flash_over_jtag is a command-line tool, however it does not support USBTAP. And it does not work on Windows 7.

I attached this tool.

Fiona Kuang

Technical Information & Commercial Support

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: does anybody have a dsp56805 config file for flash programmer v1.2?

ruvimelaver — Wed, 29 Jun 2016 11:04:49 GMT

Hello ,

Please advise if I can program the MC56F84789 using this tool as I did not see the .cfg file for the item.

Thanks

Ruvi

Re: does anybody have a dsp56805 config file for flash programmer v1.2?

TICS_Fiona — Thu, 30 Jun 2016 07:03:17 GMT

Hello Ruvi

56800E Flash Programmer does not support MC56F84789.

To program MC56F84789, user can use CodeWarrior for MCU10.6.4's built in flash programmer. CodeWarrior v10.6.4 can be downloaded from

http://tinyurl.com/6jo5tge

Or choose P&E's Cyclone MAX:

http://www.pemicro.com/products/product_viewDetails.cfm?product_id=145

Or you can use DSC Flasher to program 56F84789. Please search 'AN4824' on NXP website (www.nxp.com) to download this tool and help document. It is a free tool.

Best Regards

Fiona Kuang

TIC - Technical Information Center

Re: does anybody have a dsp56805 config file for flash programmer v1.2?

ruvimelaver — Thu, 30 Jun 2016 07:26:02 GMT

Hello Fiona,

Thanks for your reply .

I tried to work with the "DCS Flasher" using the GUI ,but I am getting an error which I am not getting using CodeWarrior .

================================

Using the "DCS Flasher" I Do a Program/Verify I get the following message :

================================

Performing PROGRAM operation on MC56F84789 through the UTAP . . .

Error 1: Unaligned srecord at C:/work/Bootloader/uC/Bootloader/MC56F84789_Internal_PFlash_LDM/56F84789_Bootloader.elf.S:271: "S30B0001F3FDCDAB3412FF0046" .

=============================================

But when I am using the Flash operation using the Codewarrior I do not get any Error , please see the following :

Console output :

====================================

fl::target -lc "LC for Simple Flash"

fl::target -b 0x60400 0x1000

fl::target -v off -l off

cmdwin::fl::device -d "MC56F84789_P_FLASH" -o "144kx16x1" -a 0x0 0x6bfff

cmdwin::fl::image -f "C:\\work\\Bootloader\\uC\\Bootloader\\MC56F84789_Internal_PFlash_LDM\\56F84789_Bootloader.elf.S" -t "Auto Detect" -re on -r 0x0 0x6bfff -oe off

cmdwin::fl::erase image

Beginning Operation ...

-------------------------

Auto-detection is successful.

File is of type Motorola S-Record Format.

Auto-detection is successful.

File is of type Motorola S-Record Format.

Performing target initialization ...

Erasing ......

Erase Command Succeeded.

cmdwin::fl::write

Beginning Operation ...

-------------------------

Auto-detection is successful.

File is of type Motorola S-Record Format.

Programming ...

Program Command Succeeded

Flash Operation. done

cmdwin::fl::device -d "MC56F84789_X_FLASH" -o "152kx16x1" -a 0x8000 0x3ffff

cmdwin::fl::image -f "C:\\work\\Bootloader\\uC\\Bootloader\\MC56F84789_Internal_PFlash_LDM\\56F84789_Bootloader.elf.S" -t "Auto Detect" -re on -r 0x8000 0x3ffff -oe off

cmdwin::fl::erase image

Beginning Operation ...

-------------------------

Auto-detection is successful.

File is of type Motorola S-Record Format.

Auto-detection is successful.

File is of type Motorola S-Record Format.

Nothing to erase. No sectors selected

Erase Command Succeeded.

cmdwin::fl::write

Beginning Operation ...

-------------------------

Flash Operation. ...

Auto-detection is successful.

File is of type Motorola S-Record Format.

Programming ...

Programming warning. No data to be programmed in selected flash memory range.

Program Command Succeeded

Flash Operation. done

fl::target -lc "LC for Simple Flash"

fl::target -b 0x60400 0x1000

fl::target -v off -l off

cmdwin::fl::device -d "MC56F84789_P_FLASH" -o "144kx16x1" -a 0x0 0x6bfff

cmdwin::fl::erase all

Beginning Operation ...

-------------------------

Performing target initialization ...

Erasing ..........

Erase Command Succeeded.

cmdwin::fl::device -d "MC56F84789_X_FLASH" -o "152kx16x1" -a 0x8000 0x3ffff

cmdwin::fl::erase all

-------------------------

Erasing ..........

Erase Command Succeeded.

cmdwin::fl::device -d "MC56F84789_P_FLASH" -o "144kx16x1" -a 0x0 0x6bfff

cmdwin::fl::blankcheck all

Beginning Operation ...

-------------------------

Flash Operation.

Blank Checking ..........

BlankCheck Command Succeeded.

cmdwin::fl::device -d "MC56F84789_X_FLASH" -o "152kx16x1" -a 0x8000 0x3ffff

cmdwin::fl::blankcheck all

Beginning Operation ...

-------------------------

Flash Operation.

Blank Checking ..........

BlankCheck Command Succeeded.

fl::target -lc "LC for Simple Flash"

fl::target -b 0x60400 0x1000

fl::target -v off -l off

cmdwin::fl::device -d "MC56F84789_P_FLASH" -o "144kx16x1" -a 0x0 0x6bfff

cmdwin::fl::image -f "C:\\work\\Bootloader\\uC\\Bootloader\\MC56F84789_Internal_PFlash_LDM\\56F84789_Bootloader.elf.S" -t "Auto Detect" -re on -r 0x0 0x6bfff -oe off

cmdwin::fl::erase image

Beginning Operation ...

-------------------------

Auto-detection is successful.

File is of type Motorola S-Record Format.

Auto-detection is successful.

File is of type Motorola S-Record Format.

Performing target initialization ...

Erasing ......

Erase Command Succeeded.

cmdwin::fl::write

Beginning Operation ...

-------------------------

Flash Operation. ...

Auto-detection is successful.

File is of type Motorola S-Record Format.

Programming ...

Program Command Succeeded

Flash Operation. done

cmdwin::fl::device -d "MC56F84789_X_FLASH" -o "152kx16x1" -a 0x8000 0x3ffff

cmdwin::fl::image -f "C:\\work\\Bootloader\\uC\\Bootloader\\MC56F84789_Internal_PFlash_LDM\\56F84789_Bootloader.elf.S" -t "Auto Detect" -re on -r 0x8000 0x3ffff -oe off

cmdwin::fl::erase image

Beginning Operation ...

-------------------------

Auto-detection is successful.

File is of type Motorola S-Record Format.

Auto-detection is successful.

File is of type Motorola S-Record Format.

Nothing to erase. No sectors selected

Erase Command Succeeded.

cmdwin::fl::write

Beginning Operation ...

-------------------------

Flash Operation. ...

Auto-detection is successful.

File is of type Motorola S-Record Format.

Programming ...

Programming warning. No data to be programmed in selected flash memory range.

Program Command Succeeded

Flash Operation. done

================================

Please advise if you have a solution as I need to give our production line an easy tool for programming ( via command line ...batch ...)

Thanks again

Ruvi

topic does anybody have a dsp56805 config file for flash programmer v1.2? in CodeWarrior Development Tools

does anybody have a dsp56805 config file for flash programmer v1.2?

Re: does anybody have a dsp56805 config file for flash programmer v1.2?

Re: does anybody have a dsp56805 config file for flash programmer v1.2?

Re: does anybody have a dsp56805 config file for flash programmer v1.2?

Re: does anybody have a dsp56805 config file for flash programmer v1.2?