Can't step through code using PE Micro Multilink

usr4691 — Tue, 21 Oct 2014 21:32:11 GMT

I built an .ELF file using Code Warrior for MPC55XX and tried to debug it using the PE Micro USB MULTI-LINK Interface. When pressing the bebug button I get the message 'Can't read symbolocs for target <generator.elf>'. My question is how do I get the PE Micro Multilink USB Interface device to step through the elf code loaded onto my MPC5674 board.

Re: Can't step through code using PE Micro Multilink

usr4691 — Tue, 21 Oct 2014 21:33:05 GMT

The Code Warrior version is 2.7.

Re: Can't step through code using PE Micro Multilink

trytohelp — Thu, 23 Oct 2014 07:31:31 GMT

Hi Barton,

There are several versions of Multilink supporting MPC5xxx:

- USB Qorivva Multilink -> http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320021

- USB Multilink Universal -> http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320137

- USB Multilink Universal FX -> P&E Microcomputer Systems - USB Multilink Universal FX - USB Multilink Universal FX All-In-One Development Interface - H…

To check the configuration I recommend you to:

- create a sample project with the wizard with your configuration,

- build the project,

- launch the debugger.

The application should be load and you should be able to debug it.

Have a great day,
Pascal Irrle

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Re: Can't step through code using PE Micro Multilink in CodeWarrior Development Tools

Can't step through code using PE Micro Multilink

Re: Can't step through code using PE Micro Multilink

Re: Can't step through code using PE Micro Multilink